User`s manual

RSK+ RX62N Applications
R20UT0255EG0100 Page 17 of 17
4.3 Communications Device Class Application
The CDC sample application demonstrates communication with a Windows PC using a standard terminal program. Windows provides
a suitable application called HyperTerminal. Any other serial terminal program will be able to be used if available.
Program the RSK with the CDC application and run the code as described in the RSK tutorial manual. Connect a USB cable between
the host PC and the RSK. The first time the device is connected, to a specific USB port, Windows will detect the new device and run
the “Found New Hardware Wizard”:
Windows will present the following dialog where you should
select “No, not this time”.
In the following dialog select “Install from a list or specific
location (Advanced)” to allow you to select the correct ‘inf’ file.
August 26, 2010