User`s manual

RSK+ RX62N Applications
4. Applications
4.1 Introduction to Applications
The following sections introduce the sample applications that can be used to demonstrate each of the USB solutions. The HID and LibUSB
projects require specially written host applications that are supplied as both executables and as source. The CDC and MSC projects make
use of standard Windows applications.
All the applications require that the RSK has been programmed with the appropriate sample code for the application. Details of how to
program the RSK have been provided as part of the tutorial with the product. To obtain a digital copy of the manual please visit the
Renesas web site at www.renesas.com/renesas_starter_kits
and select your RSK from the list.
The RSK provides a connector for USB0.
The applications will run on the RSK with jumpers and links set to the default position. Ensure the following jumpers are set:
Jumper Setting
J7 USB0DPUPE
J8 USB0VBUS
J18 Func
4.2 Human Interface Device Application
The HID host sample application is written for a Windows host PC and is called RSK_HID.
The pre-built executable has been provided with the project generator. Navigate to the release directory under the project and run
RSK_HID.exe. The following window will be displayed:
Figure 1 - HID host PC application
R20UT0255EG0100 Page 15 of 15
August 26, 2010