User`s manual

RX600 & RX200 Series Simple Flash API for RX
R01AN0544EU0250 Rev.2.50 Page 13 of 33
March 4, 2014
In e
2
studio:
This is done in the ‘Debug Configurations’ window which is accessed by selecting your project and clicking ‘Run >>
Debug Configurations’. Select your debug configuration and then select the ‘Debugger’ tab. Now click the ‘Debug Tool
Settings’ tab and click the box at the end of the row which contains ‘Internal Flash Memory Overwrite’.
Place a check in the boxes next to the flash blocks you desire to be overwritten instead of being erased and click OK.