User Manual

RTK0EE0013D10001BJ Section 6 Wireless evaluation
R02UZ0004EJ0100 Rev.1.00 Page 11 of 24
Dec.31.22
tointl
OFDM Interleaving mode setting
Interleaving mode
toscr
OFDM Scrambler value setting
OFDM Scrambler value
tostf
OFDM STF length setting
OFDM STF length
tccam
CCA mode setting
CCA mode
tfcdr
CCA duration setting for FSK
CCA duration for FSK
tfccavt
CCA level threshold for FSK
CCA level threshold value for FSK
tfccavtd
CCA level threshold for FSK in dBm
CCA level threshold value (dBm) for FSK
tocdr
CCA duration setting for OFDM
CCA duration for OFDM
toccavt
CCA level threshold for OFDM
CCA level threshold value for OFDM
toccavtd
CCA level threshold for OFDM in dBm
CCA level threshold value (dBm) for OFDM
tgpios
GPIO terminal setting
GPIO terminal function
tgpio
Get the current settings of the GPIO terminal
(None)
tgpioo
GPIO output port voltage level setting
GPIO output port voltage level
tgpioi
Get the GPIO input port voltage level
GPIO port number
tberlen
Frame length for RX BER setting
Frame length for RX BER
tberpn9
PN9 mode for BER setting
PN9 mode for BER
tffh
Frequency hopping transmission (FSK)
Setting for frequency hopping transmission
tofh
Frequency hopping transmission (OFDM) Setting for frequency hopping transmission
ram
RAM read and write mode
read and write mode setting
reg
Register read and write mode
read and write mode setting
tftx
FSK Packet transmission
Number of transmissions
totx
OFDM Packet transmission
Number of transmissions
tfpn9
FSK PN9 continuous modulated transmission
(None)
topn9
OFDM PN9 continuous modulated
transmission
(None)
tnmtx
Continuous unmodulated transmission
(None)
tfrx
FSK Packet reception
Reception option
torx
OFDM Packet reception
Reception option
te
ED measurement
(None)
tcca
CCA execution
(None)
tmstxs
Tx setting for ModeSwitch & New Mode
Frame
Setting option
tmstx
ModeSwitch & New Mode Frame transmission
Number of transmissions
tmsrxs
Rx setting for ModeSwitch & New Mode
Frame
Setting option
tmsrx
ModeSwitch & New Mode Frame reception
Reception options
tttl
Regulation mode setting
(Tx Total Time Limit, Max Tx Duration and
Min Pause Duration Setting)
Regulation mode and parameters
tantdv
Antenna diversity setting
Enable / Disable
tantnum
Setting the number of antennas to use
Number of antennas
tantsel
Setting the antenna number used for Tx / Rx
Antenna number
rst
Reset all (Test function, RF driver and
Renesas Sub-GHz transceiver)
(None)
opt
Test function option setting
Display mode of Test function
val
Test function settings display
(None)