User Manual
Table Of Contents
- 1. Overview
- 2. External view
- 3. Parts Layout
- 4. Operating Environment
- 5. User Circuits
- 6. Wireless evaluation
- 7. Hardware specifications
- 7.1 North America Band
- 7.1.1 OFDM、Channel Spacing = 1200KHz、Modulation = Option1 / MCS6 / 2400kbps
- 7.1.2 OFDM、Channel Spacing = 800KHz、Modulation = Option2 / MCS6 / 1200kbps
- 7.1.3 OFDM、Channel Spacing = 400KHz、Modulation = Option3 / MCS6 / 600kbps
- 7.1.4 OFDM、Channel Spacing = 200KHz、Modulation = Option4 / MCS6 / 300kbps
- 7.1.5 FSK、Channel Spacing = 200KHz、50kbps / m = 1.0
- 7.1.6 FSK、Channel Spacing = 400KHz、150kbps / m = 0.5
- 7.1 North America Band
- 8. Additional Information
- 9. Certification of Compliance
RTK0EE0013D10001BJ Section 5 User Circuits
R02UZ0004EJ0100 Rev.1.00 Page 9 of 24
Dec.31.22
5. User Circuits
DIP switch
Set the following when evaluating (normal mode).
Table 5-1: DIP switch Settings
Mode
DIP switch Settings
Evaluation (normal mode)
ON:1,2 OFF:3,4,5,6,7,8
Connection of control MCU(RX65N) and wireless transceiver IC (CWX-M)
Table 5-2: Connection of control MCU(RX65N) and wireless transceiver IC (CWX-M)
Control MCU(RX65N)
Transceiver IC (CWX-M)
Note
RSTB
P46
CWX-M reset control
MODE
P47
CWX-M operation mode control
INTOUT0
PD5
CWX-M GPIO0
INTOUT1
PD6
CWX-M GPIO1 *1
INTOUT2
PD7
CWX-M GPIO2 *1
CLK
PD3
SPI Serial clock *2
SEN
PD4
SPI Slave select *2
SIN
PD1
SPI MOSI(Master Out Slave In) *2
SOUT
PD2
SPI MISO(Master In Slave Out) *2
*1 Reserved for option use.
*2 RX65N is master device.