User’s Manual 16 表紙 R9A06G062GNP RTK0EE0013D10001BJ User’s Manual Sub-GHz Wireless Communication Evaluation Kit For North America Rev.1.00 All information contained in these materials, including products and product specifications, represents information on the product at the time of publication and is subject to change by Renesas Electronics Corp. without notice. Please review the latest information published by Rev.1.00 2022.
Notice 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation or any other use of the circuits, software, and information in the design of your product or system.
General Precautions in the Handling of Microprocessing Unit and Microcontroller Unit Products The following usage notes are applicable to all Microprocessing unit and Microcontroller unit products from Renesas. For detailed usage notes on the products covered by this document, refer to the relevant sections of the document as well as any technical updates that have been issued for the products. 1.
How to Use This Manual 1. Purpose and Target Readers This manual is intended to give users an understanding of the basic specifications and correct usage of this product. This manual is intended for users who want to use this product to evaluate the MCU and debug programs. The readers of this manual are expected to have knowledge of the MCU functions and debuggers. Particular attention should be paid to the precautionary notes when using the manual.
Table of Contents 1. Overview ............................................................................................................................ 4 Package Components................................................................................................................................ 4 Purpose ...................................................................................................................................................... 4 Features ....................................
R9A06G062GNP RTK0EE0013D10001BJ User’s Manual R02UZ0004EJ0100 Rev.1.00 2022.12.31 1. Overview Package Components Thank you for purchasing the Sub-GHz Wireless Communication Evaluation Kit from Renesas (hereinafter referred to as “this product”). This product consists of the Target Board for Sub-GHz Wireless Communication Evaluation Kit (RTK0EE0013D10001BJ) Purpose This product is an evaluation tool for a Sub-GHz Wireless Communication Solutions. This manual descries hardware specifications.
RTK0EE0013D10001BJ Section 1 Overview Block Diagram Figure 1-1 shows the block diagram of this product. Figure 1-1: Block Diagram R02UZ0004EJ0100 Rev.1.00 Dec.31.
RTK0EE0013D10001BJ Section 2 External view 2. External view Figure 2-1 shows the external view of this product. Figure 2-1: External view This product includes Sub-GHz wireless function. The antenna of this product permanently glued with epoxy to the SMA connector and cannot be removed. Note: Never disassemble or remodel this product. Never use an antenna other than the antenna provided with the product, as it violates the radio-related laws. R02UZ0004EJ0100 Rev.1.00 Dec.31.
RTK0EE0013D10001BJ Section 3 Parts Layout 3. Parts Layout Figure 3-1 shows the parts layout of this product. Figure 3-1: Parts Layout R02UZ0004EJ0100 Rev.1.00 Dec.31.
RTK0EE0013D10001BJ Section 4 Operating Environment 4. Operating Environment Figure 4-1 shows the operating environment of this product. Install “Virtual COM Port USB Driver” on the host PC. In addition, install the serial terminal software as it will be used for wireless evaluation. Figure 4-1: Operating Environment Virtual COM Port USB Driver If your PC is connected to the Internet, Windows Update will automatically install the latest driver.
RTK0EE0013D10001BJ Section 5 User Circuits 5. User Circuits DIP switch Set the following when evaluating (normal mode).
RTK0EE0013D10001BJ Section 6 Wireless evaluation 6. Wireless evaluation Serial terminal software connection settings 1. 2. 3. Connect the host PC and this product with a USB cable. Check which COM port the USB of this product is assigned to using the device manager. Start up the serial terminal software and set serial port. 1. When the sample program is started, it enters "command menu mode" and is ready to accept commands.Table 6-1 shows the command list of sample program.
RTK0EE0013D10001BJ Section 6 Wireless evaluation tointl OFDM Interleaving mode setting Interleaving mode toscr OFDM Scrambler value setting OFDM Scrambler value tostf OFDM STF length setting OFDM STF length tccam CCA mode setting CCA mode tfcdr CCA duration setting for FSK CCA duration for FSK tfccavt CCA level threshold for FSK CCA level threshold value for FSK tfccavtd CCA level threshold for FSK in dBm CCA level threshold value (dBm) for FSK tocdr CCA duration setting for OFDM CC
RTK0EE0013D10001BJ Section 6 Wireless evaluation help Command list display (None) tsleep Sleep Mode Setting (None) The gray areas are commands not supported by this product. The transmission output power setting of R9A06G062GNP is fixed to the following settings. It cannot be changed by command. FSK: 1.5dBm OFDM: -2.0dBm Details on the command specification is explained in the application note " RF Characteristic Evaluation Program for Renesas Sub-GHz Transceiver Operation Manual (R30AN0376)”.
RTK0EE0013D10001BJ Section 7 Hardware specifications 7. Hardware specifications Table 7-1 shows the communication specifications of this product. Table 7-1: Communication specifications Channel Modulation Spacing Option MCS North America Band 902 - 928MHz OFDM FSK 1200KHz 800KHz 400KHz 200KHz 200KHz 400KHz Data Rate / Modulation Index 2400kbps 1200kbps 600kbps 300kbps 50kbps / m=1.0 150kbps / m=0.
RTK0EE0013D10001BJ Section 7 Hardware specifications 7.1.3 OFDM、Channel Spacing = 400KHz、Modulation = Option3 / MCS6 / 600kbps Transmission output power at SMA connecter = +24dBm Channel Number Setting: ChanPlanID 2 Channel number Frequency [MHz] Channel number Frequency [MHz] Channel number Frequency [MHz] Channel number Frequency [MHz] 0 902.4 1 902.8 2 903.2 3 903.6 4 904.0 5 904.4 6 904.8 7 905.2 8 905.6 9 906.0 10 906.4 11 906.8 12 907.2 13 907.6 14 908.
RTK0EE0013D10001BJ Section 7 Hardware specifications 7.1.4 OFDM、Channel Spacing = 200KHz、Modulation = Option4 / MCS6 / 300kbps Transmission output power at SMA connecter = +24dBm Channel Number Setting: ChanPlanID 1 Channel number Frequency [MHz] Channel number Frequency [MHz] Channel number Frequency [MHz] Channel number Frequency [MHz] 0 902.2 1 902.4 2 902.6 3 902.8 4 903.0 5 903.2 6 903.4 7 903.6 8 903.8 9 904.0 10 904.2 11 904.4 12 904.6 13 904.8 14 905.
RTK0EE0013D10001BJ Section 7 Hardware specifications 7.1.5 FSK、Channel Spacing = 200KHz、50kbps / m = 1.0 Transmission output power at SMA connecter = +30dBm Channel Number Setting: ChanPlanID 1 Channel number Frequency [MHz] Channel number Frequency [MHz] Channel number Frequency [MHz] Channel number Frequency [MHz] 0 902.2 1 902.4 2 902.6 3 902.8 4 903.0 5 903.2 6 903.4 7 903.6 8 903.8 9 904.0 10 904.2 11 904.4 12 904.6 13 904.8 14 905.0 15 905.2 16 905.
RTK0EE0013D10001BJ Section 7 Hardware specifications 7.1.6 FSK、Channel Spacing = 400KHz、150kbps / m = 0.5 Transmission output power at SMA connecter = +30dBm Channel Number Setting: ChanPlanID 2 Channel number Frequency [MHz] Channel number Frequency [MHz] Channel number Frequency [MHz] Channel number Frequency [MHz] 0 902.4 1 902.8 2 903.2 3 903.6 4 904.0 5 904.4 6 904.8 7 905.2 8 905.6 9 906.0 10 906.4 11 906.8 12 907.2 13 907.6 14 908.0 15 908.4 16 908.
RTK0EE0013D10001BJ Section 8 Additional Information 8. Additional Information Technical Support For details on the Transceiver IC (CWX-M), refer to the R9A06G062GNP Sub-GHz Transceiver User’s Manual: Hardware. The latest information is available from the Web page. Technical Contact Details General information on Renesas microcontrollers can be found on the Renesas website at: https://www.renesas.com/ Note Do not install this product into your product.
RTK0EE0013D10001BJ Section 9 Certification of Compliance 9. Certification of Compliance This product complies with the laws and regulations described below. Radio-Related Laws North America: FCC ID：2AEMXCWXMRTK1BJ FCC Regulatory This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Revision History Rev. Date 1.00 2022.12.
R9A06G062GNP RTK0EE0013D10001BJ User’s Manual Publication Date: Rev.1.00 Dec.31.
R9A06G062GNP R02UZ0004EJ0100
