Datasheet

R01DS0060EJ0160 Rev.1.60 Page 107 of 154
May 19, 2014
RX630 Group 5. Electrical Characteristics
Caution: To protect the LSI’s reliability, the output current values should not exceed the values in this table.
Note 1. This is the value when normal driving ability is set with a pin for which normal driving ability is selectable.
Note 2. This is the value when high driving ability is set with a pin for which normal driving ability is selectable or the value of the pin to
which high driving ability is fixed.
Table 5.6 Permissible Output Currents
Conditions: VCC = AVCC0 = VREFH = VCC_USB = 2.7 to 3.6 V, VREFH0 = 2.7 V to AVCC0,
VSS = AVSS0 = VREFL/VREFL0 = VSS_USB = 0 V, T
a
= T
opr
Item Symbol Min. Typ. Max. Unit
Permissible output low current
(average value per pin)
All output pins*
1
Normal drive I
OL
—— 2.0 mA
All output pins*
2
High drive I
OL
3.8 mA
Permissible output low current
(max. value per pin)
All output pins*
1
Normal drive I
OL
—— 4.0 mA
All output pins*
2
High drive I
OL
7.6 mA
Permissible output low current (total) Total of all output pins
I
OL
—— 80 mA
Permissible output high current
(average value per pin)
All output pins (except for
USB_DPUPE pin)*
1
Normal drive –I
OH
—— –2.0mA
USB_DPUPE pin*
2
High drive –I
OH
—— –3.8mA
Permissible output high current
(max. value per pin)
All output pins*
1
Normal drive –I
OH
—— –4.0mA
All output pins*
2
High drive –I
OH
—— –7.6mA
Permissible output high current (total) Total of all output pins
–I
OH
—— –80 mA