Datasheet

R01DS0031EJ0210 Rev.2.10 Page 66 of 111
Jul 31, 2012
M16C/65 Group 5. Electrical Characteristics
V
CC1
= V
CC2
= 5 V
Note:
1. This indicates the memory in which the program to be executed exists.
Table 5.22 Electrical Characteristics (4)
R5F3651ENFC, R5F3651EDFC, R5F3651KNFC, R5F3650KNFA, R5F3650KNFB, R5F3651KDFC, R5F3650KDFB,
R5F3650KDFA, R5F3651MNFC, R5F3650MNFA, R5F3650MNFB, R5F3651MDFC, R5F3650MDFA,
R5F3650MDFB, R5F3651NNFC, R5F3650NNFA, R5F3650NNFB, R5F3651NDFC, R5F3650NDFA, R5F3650NDFB
V
CC1
= V
CC2
= 4.2 to 5.5 V, V
SS
= 0 V at T
opr
= −20°C to 85°C/−40°C to 85°C, f
(BCLK)
= 32 MHz unless otherwise specified.
Symbol Parameter Measuring Condition
Standard
Unit
Min. Typ. Max.
R
fXCIN
Feedback resistance
XCIN
8MΩ
I
CC
Power supply current
In single-chip, mode,
the output pin are
open and other pins
are V
SS
High-speed mode f
(BCLK)
= 32 MHz
XIN = 4 MHz (square wave), PLL multiplied by 8
125 kHz on-chip oscillator stopped
26.0 mA
f
(BCLK)
= 32 MHz, A/D conversion
XIN = 4 MHz (square wave), PLL multiplied by 8
125 kHz on-chip oscillator stopped
27.0 mA
f
(BCLK)
= 20 MHz
XIN = 20 MHz (square wave)
125 kHz on-chip oscillator stopped
17.0 mA
40 MHz on-chip
oscillator mode
Main clock stopped
40 MHz on-chip oscillator on,
divide-by-4 (f(BCLK) = 10 MHz)
125 kHz on-chip oscillator stopped
18.0 mA
125 kHz on-chip
oscillator mode
Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator on, no division
FMR22 = 1 (slow read mode)
550.0 μA
Low-power mode f
(BCLK)
= 32 kHz
In low-power mode
FMR22 = FMR23 = 1
on flash memory
(1)
170.0 μA
f
(BCLK)
= 32 kHz
In low-power mode
on RAM
(1)
45.0 μA
Wait mode Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator on
Peripheral clock operating
T
opr
= 25°C
20.5 μA
f
(BCLK)
= 32 kHz (oscillation capacity High)
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock operating
T
opr
= 25°C
11.0 μA
f
(BCLK)
= 32 kHz (oscillation capacity low)
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock operating
T
opr
= 25°C
6.0 μA
Stop mode Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock stopped
T
opr
= 25°C
1.7 μA
During flash memory
program
f
(BCLK)
= 10 MHz, PM17 = 1 (one wait)
V
CC1
= 5.0 V
20.0 mA
During flash memory
erase
f
(BCLK)
= 10 MHz, PM17 = 1 (one wait)
V
CC1
= 5.0 V
30.0 mA