Datasheet

R01DS0031EJ0210 Rev.2.10 Page 67 of 111
Jul 31, 2012
M16C/65 Group 5. Electrical Characteristics
V
CC1
= V
CC2
= 5 V
Note:
1. This indicates the memory in which the program to be executed exists.
Table 5.23 Electrical Characteristics (5)
R5F3651RNFC, R5F3650RNFA, R5F3650RNFB, R5F3651RDFC, R5F3650RDFA, R5F3650RDFB, R5F3651TNFC,
R5F3650TNFA, R5F3650TNFB, R5F3651TDFC, R5F3650TDFA, R5F3650TDFB
V
CC1
= V
CC2
= 4.2 to 5.5 V, V
SS
= 0 V at T
opr
= −20 to 85°C/−40 to 85°C, f
(BCLK)
= 32 MHz unless otherwise specified.
Symbol Parameter Measuring Condition
Standard
Unit
Min. Typ. Max.
R
fXCIN
Feedback resistance
XCIN
15 MΩ
I
CC
Power supply current
In single-chip, mode,
the output pin are
open and other pins
are V
SS
High-speed mode f
(BCLK)
= 32 MHz
XIN = 4 MHz (square wave), PLL multiplied by 8
125 kHz on-chip oscillator stopped
32.0 mA
f
(BCLK)
= 32 MHz, A/D conversion
XIN = 4 MHz (square wave), PLL multiplied by 8
125 kHz on-chip oscillator stopped
32.7 mA
f
(BCLK)
= 20 MHz
XIN = 20 MHz (square wave)
125 kHz on-chip oscillator stopped
21.0 mA
40 MHz on-chip
oscillator mode
Main clock stopped
40 MHz on-chip oscillator on,
divide-by-4 (f(BCLK) = 10 MHz)
125 kHz on-chip oscillator stopped
23.0 mA
125 kHz on-chip
oscillator mode
Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator on, no division
FMR22 = 1 (slow read mode)
750.0 μA
Low-power mode f
(BCLK)
= 32 kHz
In low-power mode
FMR22 = FMR23 = 1
on flash memory
(1)
250.0 μA
f
(BCLK)
= 32 kHz
In low-power mode
on RAM
(1)
45.0 μA
Wait mode Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator on
Peripheral clock operating
T
opr
= 25°C
21.0 μA
f
(BCLK)
= 32 kHz (oscillation capacity High)
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock operating
T
opr
= 25°C
11.0 μA
f
(BCLK)
= 32 kHz (oscillation capacity Low)
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock operating
T
opr
= 25°C
6.0 μA
Stop mode Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock stopped
T
opr
= 25°C
1.7 μA
During flash
memory program
f
(BCLK)
= 10 MHz, PM17 = 1 (one wait)
V
CC1
= 5.0 V
20.0 mA
During flash
memory erase
f
(BCLK)
= 10 MHz, PM17 = 1 (one wait)
V
CC1
= 5.0 V
30.0 mA