Datasheet

R01DS0032EJ0200 Rev.2.00 Page 71 of 88
Feb 07, 2011
M16C/64A Group 5. Electrical Characteristics
V
CC1
= V
CC2
= 3 V
Note:
1. This indicates the memory in which the program to be executed exists.
Table 5.39 Electrical Characteristics (2)
R5F364A6NFA, R5F364A6NFB, R5F364A6DFA, R5F364A6DFB,
R5F364AENFA, R5F364AENFB, R5F364AEDFA, R5F364AEDFB
V
CC1
= V
CC2
= 2.7 to 3.3 V, V
SS
= 0 V at T
opr
= − 20 ° C to 85 ° C/ − 40 ° C to 85 ° C, f
(BCLK)
= 25 MHz unless otherwise specified.
Symbol Parameter Measuring Condition
Standard
Unit
Min. Typ. Max.
I
CC
Power supply current
In single-chip, mode,
the output pin are
open and other pins
are V
SS
High-speed mode f
(BCLK)
= 25 MHz
XIN = 4.2 MHz (square wave), PLL multiplied by 6
125 kHz on-chip oscillator stopped
20.0 mA
f
(BCLK)
= 25 MHz, A/D conversion
XIN = 4.2 MHz (square wave), PLL multiplied by 6
125 kHz on-chip oscillator stopped
20.7 mA
f
(BCLK)
= 20 MHz
XIN = 20 MHz (square wave)
125 kHz on-chip oscillator stopped
16.0 mA
125 kHz on-chip
oscillator mode
Main clock stopped
125 kHz on-chip oscillator on, no division
FMR22 = 1 (slow read mode)
450.0
μA
Low-power mode f
(BCLK)
= 32 MHz
In low-power mode
FMR 22 = FMR23 = 1
On flash memory
(1)
160.0 μA
f
(BCLK)
= 32 MHz
In low-power mode
On RAM
(1)
40.0 μA
Wait mode Main clock stopped
125 kHz on-chip oscillator on
Peripheral clock operating
T
opr
= 25°C
20.0
μA
f
(BCLK)
= 32 MHz (oscillation capacity High)
125 kHz on-chip oscillator stopped
Peripheral clock operating
T
opr
= 25°C
8.0
μA
f
(BCLK)
= 32 kHz (oscillation capacity Low)
125 kHz on-chip oscillator stopped
Peripheral clock operating
T
opr
= 25°C
4.0
μA
Stop mode Main clock stopped
125 kHz on-chip oscillator stopped
Peripheral clock stopped
T
opr
= 25°C
1.6
μA
During flash
memory program
f
(BCLK)
= 10 MHz, PM17 = 1 (one wait)
V
CC1
= 3.0 V
20.0 mA
During flash
memory erase
f
(BCLK)
= 10 MHz, PM17 = 1 (one wait)
V
CC1
= 3.0 V
30.0 mA