Datasheet

R01DS0032EJ0200 Rev.2.00 Page 54 of 88
Feb 07, 2011
M16C/64A Group 5. Electrical Characteristics
V
CC1
= V
CC2
= 5 V
Note:
1. This indicates the memory in which the program to be executed exists.
Table 5.20 Electrical Characteristics (4)
R5F364AKNFA, R5F364AKNFB, R5F364AKDFA, R5F364AKDFB
R5F364AMNFA, R5F364AMNFB, R5F364AMDFA, R5F364AMDFB
V
CC1
= V
CC2
= 4.2 to 5.5 V, V
SS
= 0 V at T
opr
= −20°C to 85°C/−40°C to 85°C, f
(BCLK)
= 25 MHz unless otherwise specified.
Symbol Parameter Measuring Condition
Standard
Unit
Min. Typ. Max.
I
CC
Power supply current
In single-chip, mode,
the output pin are
open and other pins
are V
SS
High-speed mode f
(BCLK)
= 25 MHz
XIN = 4.2 MHz (square wave), PLL multiplied by 6
125 kHz on-chip oscillator stopped
22.0 mA
f
(BCLK)
= 25 MHz, A/D conversion
XIN = 4.2 MHz (square wave), PLL multiplied by 6
125 kHz on-chip oscillator stopped
22.7 mA
f
(BCLK)
= 20 MHz
XIN = 20 MHz (square wave)
125 kHz on-chip oscillator stopped
17.0 mA
125 kHz on-chip
oscillator mode
Main clock stopped
125 kHz on-chip oscillator on, no division
FMR22 = 1 (slow read mode)
550.0 μA
Low-power mode f
(BCLK)
= 32 kHz
In low-power mode
FMR22 = FMR23 = 1
on flash memory
(1)
170.0 μA
f
(BCLK)
= 32 kHz
In low-power mode
on RAM
(1)
45.0 μA
Wait mode Main clock stopped
125 kHz on-chip oscillator on
Peripheral clock operating
T
opr
= 25°C
20.5 μA
f
(BCLK)
= 32 kHz (oscillation capacity High)
125 kHz on-chip oscillator stopped
Peripheral clock operating
T
opr
= 25°C
11.0 μA
f
(BCLK)
= 32 kHz (oscillation capacity low)
125 kHz on-chip oscillator stopped
Peripheral clock operating
T
opr
= 25°C
6.0 μA
Stop mode Main clock stopped
125 kHz on-chip oscillator stopped
Peripheral clock stopped
T
opr
= 25°C
1.7 μA
During flash memory
program
f
(BCLK)
= 10 MHz, PM17 = 1 (one wait)
V
CC1
= 5.0 V
20.0 mA
During flash memory
erase
f
(BCLK)
= 10 MHz, PM17 = 1 (one wait)
V
CC1
= 5.0 V
30.0 mA