Datasheet

R01DS0033EJ0220 Rev.2.20 Page 85 of 115
Nov 01, 2012
M16C/63 Group 5. Electrical Characteristics
V
CC1
= V
CC2
= 3 V
Notes:
1. This indicates the memory in which the program to be executed exists.
2. A/D conversion is executed in repeat mode.
Table 5.42 Electrical Characteristics (2)
V
CC1
= V
CC2
= 2.7 to 3.3 V, V
SS
= 0 V at T
opr
= − 20 ° C to 85 ° C/ − 40 ° C to 85 ° C, f
(BCLK)
= 20 MHz unless otherwise specified.
Symbol Parameter Measuring Condition
Standard
Unit
Min. Typ. Max.
I
CC
Power supply current
In single-chip, mode,
the output pin are
open and other pins
are V
SS
High-speed mode f
(BCLK)
= 20 MHz (no division)
XIN = 20 MHz (square wave)
125 kHz on-chip oscillator stopped
CM15 = 1 (drive capacity High)
A/D converter stopped
9.5 mA
f
(BCLK)
= 20 MHz (no division)
XIN = 20 MHz (square wave)
125 kHz on-chip oscillator stopped
CM15 = 1 (drive capacity High)
A/D converter operating
(2)
10.2 mA
f
(BCLK)
= 20 MHz
XIN = 20 MHz (square wave)
125 kHz on-chip oscillator stopped
CM15 = 0 (drive capacity Low)
A/D converter stopped
9.2 mA
f
(BCLK)
= 20 MHz (no division)
XIN = 20 MHz (square wave)
125 kHz on-chip oscillator stopped
CM15 = 1 (drive capacity High)
PCLKSTP1 = FF (peripheral clock stopped)
7.9 mA
f
(BCLK)
= 20 MHz (no division)
XIN = 20 MHz (square wave)
125 kHz on-chip oscillator stopped
CM15 = 0 (drive capacity Low)
PCLKSTP1 = FF (peripheral clock stopped)
7.6 mA
40 MHz on-chip
oscillator mode
Main clock stopped
40 MHz on-chip oscillator on,
divide-by-2 (f
(BCLK)
= 20 MHz)
125 kHz on-chip oscillator stopped
9.0 mA
125 kHz on-chip
oscillator mode
Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator on, no division
FMR22 = 1 (slow read mode)
450.0
μA
Low-power mode f
(BCLK)
= 32 MHz
FMR 22 = FMR23 = 1 (in low-current
consumption read mode)
On flash memory
(1)
80.0 μA
Wait mode f(BCLK) = 32 kHz
Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator on
PM25 = 1 (peripheral function clock fC operating)
T
opr
= 25°C
Real-time clock operating
5.3
μA
f
(BCLK)
= 32 MHz
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
PM25 = 0 (peripheral function clock fC stopped)
T
opr
= 25°C
5.0
μA
Stop mode T
opr
= 25°C
2.2
μA
During flash
memory program
f
(BCLK)
= 10 MHz, PM17 = 1 (one wait)
V
CC1
= 3.0 V
20.0 mA
During flash
memory erase
f
(BCLK)
= 10 MHz, PM17 = 1 (one wait)
V
CC1
= 3.0 V
30.0 mA