Datasheet

R01DS0033EJ0220 Rev.2.20 Page 107 of 115
Nov 01, 2012
M16C/63 Group 5. Electrical Characteristics
V
CC1
= V
CC2
= 1.8 V
Notes:
1. This indicates the memory in which the program to be executed exists
2. A/D conversion is executed in repeat mode.
Table 5.64 Electrical Characteristics (3)
1.8 V ≤ V
CC1
= V
CC2
< 2.7 V, V
SS
= 0 V at T
opr
= −20°C to 85°C/−40°C to 85°C, f
(BCLK)
= 5 MHz unless otherwise
specified.
Symbol Parameter Measuring Condition
Standard
Unit
Min. Typ. Max.
I
CC
Power supply current
In single-chip, mode,
the output pin are
open and other pins
are V
SS
High-speed mode f
(BCLK)
= 5 MHz (no division)
XIN = 5 MHz (square wave),
125 kHz on-chip oscillator stop
CM15 = 1 (drive capacity High)
A/D converter stop
2.6 mA
f
(BCLK)
= 5 MHz (no division),
XIN = 5 MHz (square wave)
125 kHz on-chip oscillator stop
CM15 = 1 (drive capacity High)
A/D converter operating
(2)
3.3 mA
f
(BCLK)
= 5 MHz
XIN = 5 MHz (square wave)
125 kHz on-chip oscillator stop
CM15 = 0 (drive capacity Low)
A/D converter stop
2.6 mA
f
(BCLK)
= 5 MHz (no division)
XIN = 5 MHz (square wave)
125 kHz on-chip oscillator stop
CM15 = 1 (drive capacity High)
PCLKSTP1 = FF (peripheral clock stop)
2.2 mA
f
(BCLK)
= 5 MHz (no division)
XIN = 5 MHz (square wave)
125 kHz on-chip oscillator stop
CM15 = 0 (drive capacity Low)
PCLKSTP1 = FF (peripheral clock stop)
2.2 mA
40 MHz on-chip
oscillator mode
Main clock stop
40 MHz on-chip oscillator on,
divide-by-8 (f
(BCLK)
= 5 MHz)
125 kHz on-chip oscillator stop
2.8 mA
125 kHz on-chip
oscillator mode
Main clock stop
40 MHz on-chip oscillator stop
125 kHz on-chip oscillator on, no division
FMR22 = 1 (slow read mode)
450.0
μA
Low-power mode f
(BCLK)
= 32 MHz
FMR 22 = FMR23 = 1 (in low-current
consumption read mode)
on flash memory
(1)
80.0 μA
Wait mode f(BCLK) = 32 kHz
Main clock stop
40 MHz on-chip oscillator stop
125 kHz on-chip oscillator on
PM25 = 1 (peripheral function clock fC
operating)
T
opr
= 25°C
Real-time clock operating
5.3
μA
f
(BCLK)
= 32 MHz
Main clock stop
40 MHz on-chip oscillator stop
125 kHz on-chip oscillator stop
PM25 = 0 (peripheral function clock fC stop)
T
opr
= 25°C
5.0
μA
Stop mode T
opr
= 25°C
2.2
μA