Datasheet R8C/36C Group RENESAS MCU 1. R01DS0018EJ0110 Rev.1.10 Nov 02, 2010 Overview 1.1 Features The R8C/36C Group of single-chip MCUs incorporates the R8C CPU core, employing sophisticated instructions for a high level of efficiency. With 1 Mbyte of address space, and it is capable of executing instructions at high speed. In addition, the CPU core boasts a multiplier for high-speed operation processing. Power consumption is low, and the supported operating modes allow additional power control.
R8C/36C Group 1.1.2 1. Overview Specifications Tables 1.1 and 1.2 outline the Specifications for R8C/36C Group. Table 1.1 Item CPU Specifications for R8C/36C Group (1) Function Central processing unit Memory ROM, RAM, Data flash Power Supply Voltage detection Voltage circuit Detection I/O Ports Programmable I/O ports Clock Clock generation circuits Interrupts Watchdog Timer DTC (Data Transfer Controller) Timer Timer RA Timer RB Timer RC Timer RD R01DS0018EJ0110 Rev.1.
R8C/36C Group Table 1.2 Item Timer 1.
R8C/36C Group 1.2 1. Overview Product List Tables 1.3 and 1.4 list Product List for R8C/36C Group. Figure 1.1 shows a Part Number, Memory Size, and Package of R8C/36C Group. Table 1.3 Product List for R8C/36C Group (1) Part No.
R8C/36C Group Table 1.4 1. Overview Product List for R8C/36C Group (2) Part No.
R8C/36C Group 1. Overview Part No. R 5 F 21 36 6 C N XXX FP Package type: FP: PLQP0064KB-A FA: PLQP0064GA-A FB: PTQP0064LB-A ROM number Classification N: Operating ambient temperature −20°C to 85°C D: Operating ambient temperature −40°C to 85°C ROM capacity 4: 16 KB 5: 24 KB 6: 32 KB 7: 48 KB 8: 64 KB A: 96 KB C: 128 KB R8C/36C Group R8C/3x Series Memory type F: Flash memory Renesas MCU Renesas semiconductor Figure 1.1 Part Number, Memory Size, and Package of R8C/36C Group R01DS0018EJ0110 Rev.1.
R8C/36C Group 1.3 1. Overview Block Diagram Figure 1.2 shows a Block Diagram.
R8C/36C Group 1.4 1. Overview Pin Assignment P1_0/AN8/KI0(/TRCIOD) P1_1/AN9/KI1(/TRCIOA/TRCTRG) P1_2/AN10/KI2(/TRCIOB) P1_3/AN11/KI3/TRBO(/TRCIOC) P1_4(/TXD0/TRCCLK) P1_5(/INT1/RXD0/TRAIO) P1_6/IVREF1(/CLK0) P1_7/IVCMP1/INT1(/TRAIO) P4_5/ADTRG/INT0(/RXD2/SCL2) P6_5/INT4(/CLK1/CLK2/TRCIOB) P6_6/INT2(/TXD2/SDA2/TRCIOC) P6_7(/INT3/TRCIOD) P8_0(/TRFO00) P8_1(/TRFO01) P8_2(/TRFO02) P8_3(/TRFI/TRFO10) Figure 1.3 shows Pin Assignment (Top View). Tables 1.5 and 1.
R8C/36C Group Table 1.5 1.
R8C/36C Group Table 1.6 1.
R8C/36C Group 1.5 1. Overview Pin Functions Tables 1.7 and 1.8 list Pin Functions. Table 1.
R8C/36C Group 1. Overview Table 1.8 Pin Functions (2) Item Pin Name SSU SSI I2C bus Reference voltage input A/D converter D/A converter Comparator B I/O port Input port I: Input SCS SSCK SSO SCL SDA VREF I/O I/O I/O I/O I AN0 to AN11 ADTRG DA0, DA1 IVCMP1, IVCMP3 IVREF1, IVREF3 P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7, P4_3 to P4_7, P5_0 to P5_4, P5_6, P5_7, P6_0 to P6_7, P8_0 to P8_6 P4_2 O: Output R01DS0018EJ0110 Rev.1.10 Nov 02, 2010 I/O Type Description I/O Data I/O pin.
R8C/36C Group 2. 2. Central Processing Unit (CPU) Central Processing Unit (CPU) Figure 2.1 shows the CPU Registers. The CPU contains 13 registers. R0, R1, R2, R3, A0, A1, and FB configure a register bank. There are two sets of register bank.
R8C/36C Group 2.1 2. Central Processing Unit (CPU) Data Registers (R0, R1, R2, and R3) R0 is a 16-bit register for transfer, arithmetic, and logic operations. The same applies to R1 to R3. R0 can be split into high-order bits (R0H) and low-order bits (R0L) to be used separately as 8-bit data registers. R1H and R1L are analogous to R0H and R0L. R2 can be combined with R0 and used as a 32-bit data register (R2R0). R3R1 is analogous to R2R0. 2.
R8C/36C Group 2.8.7 2. Central Processing Unit (CPU) Interrupt Enable Flag (I) The I flag enables maskable interrupts. Interrupts are disabled when the I flag is set to 0, and are enabled when the I flag is set to 1. The I flag is set to 0 when an interrupt request is acknowledged. 2.8.8 Stack Pointer Select Flag (U) ISP is selected when the U flag is set to 0; USP is selected when the U flag is set to 1.
R8C/36C Group 3. 3. Memory Memory 3.1 R8C/36C Group Figure 3.1 is a Memory Map of R8C/36C Group. The R8C/36C Group has a 1-Mbyte address space from addresses 00000h to FFFFFh. The internal ROM (program ROM) is allocated lower addresses, beginning with address 0FFFFh. For example, a 64-Kbyte internal ROM area is allocated addresses 04000h to 13FFFh. The fixed interrupt vector table is allocated addresses 0FFDCh to 0FFFFh. The starting address of each interrupt routine is stored here.
R8C/36C Group 00000h 3. Memory SFR (Refer to 4. Special Function Registers (SFRs)) 002FFh 00400h Internal RAM 0XXXXh 02C00h 02FFFh 03000h SFR (2) (Refer to 4.
R8C/36C Group 4. 4. Special Function Registers (SFRs) Special Function Registers (SFRs) An SFR (special function register) is a control register for a peripheral function. Tables 4.1 to 4.12 list the special function registers. Table 4.13 lists the ID Code Areas and Option Function Select Area. Table 4.
R8C/36C Group Table 4.2 Address 003Ah 003Bh 003Ch 003Dh 003Eh 003Fh 0040h 0041h 0042h 0043h 0044h 0045h 0046h 0047h 0048h 0049h 004Ah 004Bh 004Ch 004Dh 004Eh 004Fh 0050h 0051h 0052h 0053h 0054h 0055h 0056h 0057h 0058h 0059h 005Ah 005Bh 005Ch 005Dh 005Eh 005Fh 0060h 0061h 0062h 0063h 0064h 0065h 0066h 0067h 0068h 0069h 006Ah 006Bh 006Ch 006Dh 006Eh 006Fh 0070h 0071h 0072h 0073h 0074h 0075h 0076h 0077h 0078h 0079h 007Ah 007Bh 007Ch 007Dh 007Eh 007Fh 4.
R8C/36C Group Table 4.3 Address 0080h 0081h 0082h 0083h 0084h 0085h 0086h 0087h 0088h 0089h 008Ah 008Bh 008Ch 008Dh 008Eh 008Fh 0090h 0091h 0092h 0093h 0094h 0095h 0096h 0097h 0098h 0099h 009Ah 009Bh 009Ch 009Dh 009Eh 009Fh 00A0h 00A1h 00A2h 00A3h 00A4h 00A5h 00A6h 00A7h 00A8h 00A9h 00AAh 00ABh 00ACh 00ADh 00AEh 00AFh 00B0h 00B1h 00B2h 00B3h 00B4h 00B5h 00B6h 00B7h 00B8h 00B9h 00BAh 00BBh 00BCh 00BDh 00BEh 00BFh 4.
R8C/36C Group Table 4.4 Address 00C0h 00C1h 00C2h 00C3h 00C4h 00C5h 00C6h 00C7h 00C8h 00C9h 00CAh 00CBh 00CCh 00CDh 00CEh 00CFh 00D0h 00D1h 00D2h 00D3h 00D4h 00D5h 00D6h 00D7h 00D8h 00D9h 00DAh 00DBh 00DCh 00DDh 00DEh 00DFh 00E0h 00E1h 00E2h 00E3h 00E4h 00E5h 00E6h 00E7h 00E8h 00E9h 00EAh 00EBh 00ECh 00EDh 00EEh 00EFh 00F0h 00F1h 00F2h 00F3h 00F4h 00F5h 00F6h 00F7h 00F8h 00F9h 00FAh 00FBh 00FCh 00FDh 00FEh 00FFh 4.
R8C/36C Group Table 4.5 Address 0100h 0101h 0102h 0103h 0104h 0105h 0106h 0107h 0108h 0109h 010Ah 010Bh 010Ch 010Dh 010Eh 010Fh 0110h 0111h 0112h 0113h 0114h 0115h 0116h 0117h 0118h 0119h 011Ah 011Bh 011Ch 011Dh 011Eh 011Fh 0120h 0121h 0122h 0123h 0124h 0125h 0126h 0127h 0128h 0129h 012Ah 012Bh 012Ch 012Dh 012Eh 012Fh 0130h 0131h 0132h 0133h 0134h 0135h 0136h 0137h 0138h 0139h 013Ah 013Bh 013Ch 013Dh 013Eh 013Fh 4.
R8C/36C Group Table 4.6 Address 0140h 0141h 0142h 0143h 0144h 0145h 0146h 0147h 0148h 0149h 014Ah 014Bh 014Ch 014Dh 014Eh 014Fh 0150h 0151h 0152h 0153h 0154h 0155h 0156h 0157h 0158h 0159h 015Ah 015Bh 015Ch 015Dh 015Eh 015Fh 0160h 0161h 0162h 0163h 0164h 0165h 0166h 0167h 0168h 0169h 016Ah 016Bh 016Ch 016Dh 016Eh 016Fh 0170h 0171h 0172h 0173h 0174h 0175h 0176h 0177h 0178h 0179h 017Ah 017Bh 017Ch 017Dh 017Eh 017Fh 4.
R8C/36C Group Table 4.7 Address 0180h 0181h 0182h 0183h 0184h 0185h 0186h 0187h 0188h 0189h 018Ah 018Bh 018Ch 018Dh 018Eh 018Fh 0190h 0191h 0192h 0193h 0194h 0195h 0196h 0197h 0198h 0199h 019Ah 019Bh 019Ch 019Dh 019Eh 019Fh 01A0h 01A1h 01A2h 01A3h 01A4h 01A5h 01A6h 01A7h 01A8h 01A9h 01AAh 01ABh 01ACh 01ADh 01AEh 01AFh 01B0h 01B1h 01B2h 01B3h 01B4h 01B5h 01B6h 01B7h 01B8h 01B9h 01BAh 01BBh 01BCh 01BDh 01BEh 01BFh 4.
R8C/36C Group Table 4.8 Address 01C0h 01C1h 01C2h 01C3h 01C4h 01C5h 01C6h 01C7h 01C8h 01C9h 01CAh 01CBh 01CCh 01CDh 01CEh 01CFh 01D0h 01D1h 01D2h 01D3h 01D4h 01D5h 01D6h 01D7h 01D8h 01D9h 01DAh 01DBh 01DCh 01DDh 01DEh 01DFh 01E0h 01E1h 01E2h 01E3h 01E4h 01E5h 01E6h 01E7h 01E8h 01E9h 01EAh 01EBh 01ECh 01EDh 01EEh 01EFh 01F0h 01F1h 01F2h 01F3h 01F4h 01F5h 01F6h 01F7h 01F8h 01F9h 01FAh 01FBh 01FCh 01FDh 01FEh 01FFh 4.
R8C/36C Group Table 4.9 Address 2C00h 2C01h 2C02h 2C03h 2C04h 2C05h 2C06h 2C07h 2C08h 2C09h 2C0Ah : : 2C3Ah 2C3Bh 2C3Ch 2C3Dh 2C3Eh 2C3Fh 2C40h 2C41h 2C42h 2C43h 2C44h 2C45h 2C46h 2C47h 2C48h 2C49h 2C4Ah 2C4Bh 2C4Ch 2C4Dh 2C4Eh 2C4Fh 2C50h 2C51h 2C52h 2C53h 2C54h 2C55h 2C56h 2C57h 2C58h 2C59h 2C5Ah 2C5Bh 2C5Ch 2C5Dh 2C5Eh 2C5Fh 2C60h 2C61h 2C62h 2C63h 2C64h 2C65h 2C66h 2C67h 2C68h 2C69h 2C6Ah 2C6Bh 2C6Ch 2C6Dh 2C6Eh 2C6Fh 4.
R8C/36C Group Table 4.10 Address 2C70h 2C71h 2C72h 2C73h 2C74h 2C75h 2C76h 2C77h 2C78h 2C79h 2C7Ah 2C7Bh 2C7Ch 2C7Dh 2C7Eh 2C7Fh 2C80h 2C81h 2C82h 2C83h 2C84h 2C85h 2C86h 2C87h 2C88h 2C89h 2C8Ah 2C8Bh 2C8Ch 2C8Dh 2C8Eh 2C8Fh 2C90h 2C91h 2C92h 2C93h 2C94h 2C95h 2C96h 2C97h 2C98h 2C99h 2C9Ah 2C9Bh 2C9Ch 2C9Dh 2C9Eh 2C9Fh 2CA0h 2CA1h 2CA2h 2CA3h 2CA4h 2CA5h 2CA6h 2CA7h 2CA8h 2CA9h 2CAAh 2CABh 2CACh 2CADh 2CAEh 2CAFh 4.
R8C/36C Group Table 4.11 Address 2CB0h 2CB1h 2CB2h 2CB3h 2CB4h 2CB5h 2CB6h 2CB7h 2CB8h 2CB9h 2CBAh 2CBBh 2CBCh 2CBDh 2CBEh 2CBFh 2CC0h 2CC1h 2CC2h 2CC3h 2CC4h 2CC5h 2CC6h 2CC7h 2CC8h 2CC9h 2CCAh 2CCBh 2CCCh 2CCDh 2CCEh 2CCFh 2CD0h 2CD1h 2CD2h 2CD3h 2CD4h 2CD5h 2CD6h 2CD7h 2CD8h 2CD9h 2CDAh 2CDBh 2CDCh 2CDDh 2CDEh 2CDFh 2CE0h 2CE1h 2CE2h 2CE3h 2CE4h 2CE5h 2CE6h 2CE7h 2CE8h 2CE9h 2CEAh 2CEBh 2CECh 2CEDh 2CEEh 2CEFh 4.
R8C/36C Group SFR Information (12) (1) Table 4.12 Address 2CF0h 2CF1h 2CF2h 2CF3h 2CF4h 2CF5h 2CF6h 2CF7h 2CF8h 2CF9h 2CFAh 2CFBh 2CFCh 2CFDh 2CFEh 2CFFh 2D00h : 2FFFh 4. Special Function Registers (SFRs) DTC Control Data 22 Register Symbol DTCD22 DTC Control Data 23 DTCD23 After Reset XXh XXh XXh XXh XXh XXh XXh XXh XXh XXh XXh XXh XXh XXh XXh XXh X: Undefined Note: 1. The blank areas are reserved and cannot be accessed by users. Table 4.
R8C/36C Group 5. 5. Electrical Characteristics Electrical Characteristics Table 5.1 Absolute Maximum Ratings Symbol Parameter Condition VCC/AVCC Supply voltage Rated Value Unit −0.3 to 6.5 V V VI Input voltage −0.3 to VCC + 0.3 VO Output voltage −0.3 to VCC + 0.3 V Pd Power dissipation 500 mW Topr Operating ambient temperature −20 to 85 (N version)/ −40 to 85 (D version) °C Tstg Storage temperature −65 to 150 °C R01DS0018EJ0110 Rev.1.
R8C/36C Group Table 5.2 5. Electrical Characteristics Recommended Operating Conditions (1) Symbol Parameter Conditions Standard Min. Typ. Max. Unit VCC/AVCC Supply voltage 1.8 — 5.5 V VSS/AVSS Supply voltage — 0 — V VIH Input “H” voltage Other than CMOS input 0.8 VCC — VCC V 0.5 VCC — VCC V 2.7 V ≤ VCC < 4.0 V 0.55 VCC — VCC V 1.8 V ≤ VCC < 2.7 V 0.65 VCC — VCC V 4.0 V ≤ VCC ≤ 5.5 V 0.65 VCC — VCC V 2.7 V ≤ VCC < 4.0 V 0.7 VCC — VCC V 1.8 V ≤ VCC < 2.7 V 0.
R8C/36C Group 5. Electrical Characteristics P0 P1 P2 P3 P4 P5 P6 P8 Figure 5.1 30 pF Ports P0 to P6, P8 Timing Measurement Circuit R01DS0018EJ0110 Rev.1.
R8C/36C Group Table 5.3 5. Electrical Characteristics A/D Converter Characteristics Symbol Parameter — Resolution — Absolute accuracy Vref = AVCC 10-bit mode 8-bit mode φAD A/D conversion clock — Tolerance level impedance tCONV Conversion time Standard Conditions Min. Typ. Max. Unit — — 10 Bit Vref = AVCC = 5.0 V AN0 to AN7 input, AN8 to AN11 input — — ±3 LSB Vref = AVCC = 3.3 V AN0 to AN7 input, AN8 to AN11 input — — ±5 LSB Vref = AVCC = 3.
R8C/36C Group Table 5.4 5. Electrical Characteristics D/A Converter Characteristics Symbol Parameter Standard Condition Min. Typ. Max. Unit — Resolution — — 8 Bit — Absolute accuracy — — 2.5 LSB tsu Setup time — — 3 µs RO Output resistor — 6 — kΩ IVref Reference power input current — — 1.5 mA (Note 2) Notes: 1. VCC/AVCC = Vref = 2.7 to 5.5 V and Topr = −20 to 85 °C (N version)/−40 to 85 °C (D version), unless otherwise specified. 2.
R8C/36C Group Table 5.6 5. Electrical Characteristics Flash Memory (Program ROM) Electrical Characteristics Symbol Parameter Conditions Standard Min. Typ. Max. Unit 1,000 (3) — — times Byte program time — 80 500 µs Block erase time — 0.
R8C/36C Group Table 5.7 5. Electrical Characteristics Flash Memory (Data flash Block A to Block D) Electrical Characteristics Symbol Parameter Standard Conditions Min. Typ. Max. Unit 10,000 (3) — — times Byte program time (program/erase endurance ≤ 1,000 times) — 160 1500 µs — Byte program time (program/erase endurance > 1,000 times) — 300 1500 µs — Block erase time (program/erase endurance ≤ 1,000 times) — 0.
R8C/36C Group Table 5.8 5. Electrical Characteristics Voltage Detection 0 Circuit Electrical Characteristics Symbol Vdet0 Parameter Standard Unit Min. Typ. Max. Voltage detection level Vdet0_0 (2) 1.80 1.90 2.05 V Voltage detection level Vdet0_1 (2) 2.15 2.35 2.50 V Voltage detection level Vdet0_2 (2) 2.70 2.85 3.05 V (2) 3.55 3.80 4.05 V — 6 150 µs — 1.
R8C/36C Group Table 5.10 5. Electrical Characteristics Voltage Detection 2 Circuit Electrical Characteristics Symbol Parameter Standard Condition Vdet2 Voltage detection level Vdet2_0 — Hysteresis width at the rising of VCC in voltage detection 2 circuit At the falling of VCC — Voltage detection 2 circuit response time (2) At the falling of VCC from 5.0 V to (Vdet2_0 − 0.1) V — Voltage detection circuit self power consumption VCA27 = 1, VCC = 5.
R8C/36C Group Table 5.12 5. Electrical Characteristics High-speed On-Chip Oscillator Circuit Electrical Characteristics Symbol — Parameter Condition Standard Unit Min. Typ. Max. VCC = 1.8 V to 5.5 V −20 °C ≤ Topr ≤ 85 °C 38.4 40 41.6 MHz VCC = 1.8 V to 5.5 V −40 °C ≤ Topr ≤ 85 °C 38.0 40 42.0 MHz High-speed on-chip oscillator frequency when the FRA4 register correction value is written into the FRA1 register and the FRA5 register correction value into the FRA3 register (2) VCC = 1.
R8C/36C Group Table 5.15 Symbol 5. Electrical Characteristics Timing Requirements of Synchronous Serial Communication Unit (SSU) Parameter Conditions Standard Min. Typ. Max. Unit tSUCYC SSCK clock cycle time 4 — — tCYC (2) tHI SSCK clock “H” width 0.4 — 0.6 tSUCYC tLO SSCK clock “L” width 0.4 — 0.
R8C/36C Group 5.
R8C/36C Group 5.
R8C/36C Group 5. Electrical Characteristics tHI VIH or VOH SSCK VIL or VOL tLO tSUCYC SSO (output) tOD SSI (input) tSU Figure 5.6 tH I/O Timing of Synchronous Serial Communication Unit (SSU) (Clock Synchronous Communication Mode) R01DS0018EJ0110 Rev.1.
R8C/36C Group Table 5.16 5. Electrical Characteristics Timing Requirements of I2C bus Interface Symbol Parameter Standard Typ. — 12tCYC + 600 (2) — 3tCYC + 300 (2) Condition Min. Max.
R8C/36C Group Table 5.17 5. Electrical Characteristics Electrical Characteristics (1) [4.2 V ≤ VCC ≤ 5.
R8C/36C Group Table 5.18 Symbol ICC 5. Electrical Characteristics Electrical Characteristics (2) [3.3 V ≤ VCC ≤ 5.5 V] (Topr = −20 to 85 °C (N version)/−40 to 85 °C (D version), unless otherwise specified.) Parameter Condition Power supply current High-speed (VCC = 3.3 to 5.5 V) clock mode Single-chip mode, output pins are open, other pins are VSS High-speed on-chip oscillator mode Low-speed on-chip oscillator mode Low-speed clock mode Wait mode Stop mode R01DS0018EJ0110 Rev.1.
R8C/36C Group 5. Electrical Characteristics Timing Requirements Table 5.19 (Unless Otherwise Specified: VCC = 5 V, VSS = 0 V, Topr = 25 °C) External Clock Input (XOUT, XCIN) Symbol tc(XOUT) tWH(XOUT) tWL(XOUT) tc(XCIN) tWH(XCIN) tWL(XCIN) Standard Min. Max.
R8C/36C Group Table 5.22 5. Electrical Characteristics Serial Interface Symbol tc(CK) tW(CKH) tW(CKL) td(C-Q) th(C-Q) tsu(D-C) th(C-D) Standard Min. Max. 200 — 100 — 100 — — 50 0 — 50 — 90 — Parameter CLKi input cycle time CLKi input “H” width CLKi input “L” width TXDi output delay time TXDi hold time RXDi input setup time RXDi input hold time Unit ns ns ns ns ns ns ns i = 0 to 2 tC(CK) VCC = 5 V tW(CKH) CLKi tW(CKL) th(C-Q) TXDi td(C-Q) tsu(D-C) th(C-D) RXDi i = 0 to 2 Figure 5.
R8C/36C Group Table 5.24 5. Electrical Characteristics Electrical Characteristics (3) [2.7 V ≤ VCC < 4.2 V] Symbol VOH Parameter Output “H” voltage Condition Max. Drive capacity High IOH = −5 mA VCC − 0.5 — VCC V IOH = −1 mA VCC − 0.5 — VCC V 1.0 — VCC V Drive capacity High IOL = 5 mA — — 0.5 V IOL = 1 mA — — 0.5 V IOL = 200 µA — — 0.5 V VCC = 3.
R8C/36C Group Table 5.25 Symbol ICC 5. Electrical Characteristics Electrical Characteristics (4) [2.7 V ≤ VCC ≤ 3.3 V] (Topr = −20 to 85 °C (N version)/−40 to 85 °C (D version), unless otherwise specified.) Parameter Condition Power supply current High-speed (VCC = 2.7 to 3.3 V) clock mode Single-chip mode, output pins are open, other pins are VSS High-speed on-chip oscillator mode Low-speed on-chip oscillator mode Low-speed clock mode Wait mode Stop mode R01DS0018EJ0110 Rev.1.
R8C/36C Group 5. Electrical Characteristics Timing requirements Table 5.26 (Unless Otherwise Specified: VCC = 3 V, VSS = 0 V, Topr = 25 °C) External Clock Input (XOUT, XCIN) Symbol Standard Parameter Min. Max.
R8C/36C Group Table 5.29 5. Electrical Characteristics Serial Interface Symbol Standard Parameter Min. Max.
R8C/36C Group Table 5.31 5. Electrical Characteristics Electrical Characteristics (5) [1.8 V ≤ VCC < 2.7 V] Symbol VOH Parameter Output “H” voltage Other than XOUT Condition Max. Drive capacity High IOH = −2 mA VCC − 0.5 — VCC V IOH = −1 mA VCC − 0.5 — VCC V 1.0 — VCC V Drive capacity High IOL = 2 mA — — 0.5 V Drive capacity Low IOL = 1 mA — — 0.5 V IOL = 200 µA — — 0.5 V 0.05 0.20 — V 0.05 0.20 — V — — 4.
R8C/36C Group Table 5.32 Symbol ICC 5. Electrical Characteristics Electrical Characteristics (6) [1.8 V ≤ VCC < 2.7 V] (Topr = −20 to 85 °C (N version)/−40 to 85 °C (D version), unless otherwise specified.) Parameter Condition Standard Unit Min. Typ. Max. XIN = 5 MHz (square wave) High-speed on-chip oscillator off Low-speed on-chip oscillator on = 125 kHz No division — 2.
R8C/36C Group 5. Electrical Characteristics Timing requirements Table 5.33 (Unless Otherwise Specified: VCC = 2.2 V, VSS = 0 V, Topr = 25 °C) External Clock Input (XOUT, XCIN) Symbol Standard Parameter Min. Max.
R8C/36C Group Table 5.36 5. Electrical Characteristics Serial Interface Symbol Standard Parameter Min. Max. Unit tc(CK) CLKi input cycle time 800 — ns tW(CKH) CLKi input “H” width 400 — ns tW(CKL) CLKi input “L” width 400 — ns td(C-Q) TXDi output delay time — 200 ns th(C-Q) TXDi hold time 0 — ns tsu(D-C) RXDi input setup time 150 — ns th(C-D) RXDi input hold time 90 — ns i = 0 to 2 tC(CK) VCC = 2.
R8C/36C Group Package Dimensions Package Dimensions Diagrams showing the latest package dimensions and mounting information are available in the “Packages” section of the Renesas Electronics website. JEITA Package Code P-LQFP64-10x10-0.50 RENESAS Code PLQP0064KB-A Previous Code 64P6Q-A / FP-64K / FP-64KV MASS[Typ.] 0.3g HD *1 D 48 33 49 NOTE) 1. DIMENSIONS "*1" AND "*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION "*3" DOES NOT INCLUDE TRIM OFFSET.
R8C/36C Group Package Dimensions JEITA Package Code P-LQFP64-14x14-0.80 RENESAS Code PLQP0064GA-A Previous Code 64P6U-A/ MASS[Typ.] 0.7g HD *1 D 33 48 49 NOTE) 1. DIMENSIONS "*1" AND "*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION "*3" DOES NOT INCLUDE TRIM OFFSET. 32 bp c Reference Symbol *2 E HE c1 b1 ZE Terminal cross section 64 17 c Index mark A2 16 ZD A 1 F A1 S L D E A2 HD HE A A1 bp b1 c c1 L1 y S e R01DS0018EJ0110 Rev.1.
R8C/36C Group Package Dimensions JEITA Package Code P-TQFP64-7x7-0.40 RENESAS Code PTQP0064LB-A Previous Code MASS[Typ.] 0.14g HD *1 NOTE) 1. DIMENSIONS"*1"AND"*2" DO NOT INCLUDE MOLD FLASH 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. D 48 33 32 49 bp c c1 HE *2 E b1 Reference Symbol Terminal cross section 17 ZE 64 16 1 ZD c θ A A2 F A1 L L1 S Detail F *3 e y S R01DS0018EJ0110 Rev.1.
REVISION HISTORY Rev. Date 0.01 1.00 Oct 30, 2009 Nov 02, 2010 1.10 Nov 02, 2010 R8C/36C Group Datasheet Description Summary Page — All pages 4 28 to 54 — 3 4 and 5 6 8 17 33 47 51 55 59 First Edition issued “Preliminary”, “Under development” deleted Table 1.3 revised “5. Electrical Characteristics” added TN-R8C-A015A/E reflected Table 1.2 “Timer RG” and “Package” revised Tables 1.3 and 1.4 revised Figure 1.1 revised Figure 1.3 “PTQP0064LB-A” added Figure 3.1 “Part Number” revised Table 5.
General Precautions in the Handling of MPU/MCU Products The following usage notes are applicable to all MPU/MCU products from Renesas. For detailed usage notes on the products covered by this manual, refer to the relevant sections of the manual. If the descriptions under General Precautions in the Handling of MPU/MCU Products and in the body of the manual differ from each other, the description in the body of the manual takes precedence. 1.
Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.