Datasheet
R8C/35C Group 5. Electrical Characteristics
R01DS0006EJ0100 Rev 1.00 Page 35 of 54
Aug. 24, 2010
Notes:
1. The measurement condition is V
CC = 1.8 V to 5.5 V and Topr = −20 to 85°C (N version) / −40 to 85°C (D version).
2. Time until the voltage monitor 2 interrupt request is generated after the voltage passes V
det2.
3. Necessary time until the voltage detection circuit operates after setting to 1 again after setting the VCA27 bit in the VCA2
register to 0.
Notes:
1. The measurement condition is T
opr = −20 to 85°C (N version) / −40 to 85°C (D version), unless otherwise specified.
2. To use the power-on reset function, enable voltage monitor 0 reset by setting the LVDAS bit in the OFS register to 0.
Figure 5.3 Power-on Reset Circuit Electrical Characteristics
Table 5.10 Voltage Detection 2 Circuit Electrical Characteristics
Symbol Parameter Condition
Standard
Unit
Min. Typ. Max.
V
det2 Voltage detection level Vdet2_0 At the falling of VCC 3.70 4.00 4.30 V
− Hysteresis width at the rising of Vcc in voltage detection
2 circuit
− 0.10 − V
−
Voltage detection 2 circuit response time
(2)
At the falling of Vcc from
5 V to (Vdet2_0 − 0.1) V
− 20 150 µs
− Voltage detection circuit self power consumption VCA27 = 1, V
CC = 5.0 V − 1.7 −µA
t
d(E-A) Waiting time until voltage detection circuit operation
starts
(3)
−−100 µs
Table 5.11 Power-on Reset Circuit
(2)
Symbol Parameter Condition
Standard
Unit
Min. Typ. Max.
t
rth External power VCC rise gradient
(1)
0 − 50,000 mV/msec
Notes:
1. V
det0 indicates the voltage detection level of the voltage detection 0 circuit. Refer to 6. Voltage Detection
Circuit of User’s Manual: Hardware (REJ09B0567) for details.
2. t
w(por) indicates the duration the external power VCC must be held below the valid voltage (0.5 V) to enable
a power-on reset. When turning on the power after it falls with voltage monitor 0 reset disabled, maintain
t
w(por) for 1 ms or more.
Vdet0
(1)
0.5 V
Internal
reset signal
t
w(por)
(2)
Voltage detection 0
circuit response time
V
det0
(1)
1
f
OCO-S
× 32
1
f
OCO-S
× 32
External
Power V
CC
trth
trth