Datasheet

R8C/24 Group, R8C/25 Group 5. Electrical Characteristics
Rev.3.00 Feb 29, 2008 Page 40 of 51
REJ03B0117-0300
Table 5.17 Electrical Characteristics (3) [Vcc = 5 V]
(T
opr = -20 to 85°C (N version) / -40 to 85°C (D version), unless otherwise specified.)
Symbol Parameter Condition
Standard
Unit
Min. Typ. Max.
I
CC Power supply
current
(V CC = 3.3 to 5.5 V)
Single-chip mode,
output pins are
open, other pins
are V
SS
Wait mode XIN clock off
High-speed on-chip oscillator off
Low-speed on-chip oscillator on = 125 kHz
While a WAIT instruction is executed
Peripheral clock operation
VCA27 = VCA26 = VCA25 = 0
VCA20 = 1
− 25 75 µA
XIN clock off
High-speed on-chip oscillator off
Low-speed on-chip oscillator on = 125 kHz
While a WAIT instruction is executed
Peripheral clock off
VCA27 = VCA26 = VCA25 = 0
VCA20 = 1
− 23 60 µA
XIN clock off
High-speed on-chip oscillator off
Low-speed on-chip oscillator off
XCIN clock oscillator on = 32 kHz (high drive)
While a WAIT instruction is executed
VCA27 = VCA26 = VCA25 = 0
VCA20 = 1
− 4.0 −µA
XIN clock off
High-speed on-chip oscillator off
Low-speed on-chip oscillator off
XCIN clock oscillator on = 32 kHz (low drive)
While a WAIT instruction is executed
VCA27 = VCA26 = VCA25 = 0
VCA20 = 1
− 2.2 −µA
Increase during
A/D converter
operation
Without sample & hold
− 2.6 − mA
With sample & hold
− 1.6 − mA
Stop mode XIN clock off, T
opr = 25°C
High-speed on-chip oscillator off
Low-speed on-chip oscillator off
CM10 = 1
Peripheral clock off
VCA27 = VCA26 = VCA25 = 0
− 0.8 3.0 µA
XIN clock off, T
opr = 85°C
High-speed on-chip oscillator off
Low-speed on-chip oscillator off
CM10 = 1
Peripheral clock off
VCA27 = VCA26 = VCA25 = 0
− 1.2 −µA