Datasheet

RL78/L12
CHAPTER 31 ELECTRICAL SPECIFICATIONS (G: TA = -40 to +105°C)
R01UH0330EJ0200 Rev.2.00 953
Dec 13, 2013
(4) When reference voltage (+) = Internal reference voltage (ADREFP1 = 1, ADREFP0 = 0), reference voltage (−) =
AVREFM/ANI1 (ADREFM = 1), target pin : ANI0, ANI16 to ANI23
(T
A = −40 to +105°C, 2.4 V ≤ EVDD = VDD ≤ 5.5 V, VSS = EVSS = 0 V, Reference voltage (+) = VBGR
Note 3
, Reference
voltage (−) = AVREFM
Note 4
= 0 V, HS (high-speed main) mode)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Resolution RES 8 bit
Conversion time tCONV 8-bit resolution 2.4 V ≤ VDD ≤ 5.5 V 17 39 μ s
Zero-scale error
Notes 1, 2
EZS 8-bit resolution 2.4 V ≤ VDD ≤ 5.5 V ±0.60 %FSR
Integral linearity error
Note 1
ILE 8-bit resolution 2.4 V ≤ VDD ≤ 5.5 V ±2.0 LSB
Differential linearity error
Note 1
DLE 8-bit resolution 2.4 V ≤ VDD ≤ 5.5 V ±1.0 LSB
Analog input voltage VAIN 0 VBGR
Note 3
V
Notes 1. Excludes quantization error (±1/2 LSB).
2. This value is indicated as a ratio (%FSR) to the full-scale value.
3. Refer to 31.6.2 Temperature sensor/internal reference voltage characteristics.
4. When reference voltage (−) = V
SS, the MAX. values are as follows.
Zero-scale error: Add ±0.35%FSR to the MAX. value when reference voltage (−) = AV
REFM.
Integral linearity error: Add ±0.5 LSB to the MAX. value when reference voltage (−) = AV
REFM.
Differential linearity error: Add ±0.2 LSB to the MAX. value when reference voltage (−) = AVREFM.