Datasheet

RL78/L12
CHAPTER 31 ELECTRICAL SPECIFICATIONS (G: TA = -40 to +105°C)
R01UH0330EJ0200 Rev.2.00 916
Dec 13, 2013
Absolute Maximum Ratings (TA = 25°C) (3/3)
Parameter Symbols Conditions Ratings Unit
Output current, high IOH1 Per pin
P10 to P17, P30 to P32, P40 to P43,
P50 to P54, P70 to P74, P120,
P125 to P127, P130, P140 to P147
−40 mA
Total of all pins
−170 mA
P10 to P14, P40 to P43, P120,
P130, P140 to P147
−70 mA
P15 to P17, P30 to P32,
P50 to P54, P70 to P74,
P125 to P127
−100 mA
IOH2 Per pin P20, P21 −0.5 mA
Total of all pins −1 mA
Output current, low IOL1 Per pin
P10 to P17, P30 to P32, P40 to P43,
P50 to P54, P60, P61, P70 to P74,
P120, P125 to P127, P130,
P140 to P147
40 mA
Total of all pins
170 mA
P10 to P14, P40 to P43, P120,
P130, P140 to P147
70 mA
P15 to P17, P30 to P32, P50 to P54,
P60, P61, P70 to P74, P125 to P127
100 mA
IOL2 Per pin P20, P21 1 mA
Total of all pins 2 mA
Operating ambient
temperature
T
A In normal operation mode −40 to +105 °C
In flash memory programming mode
Storage temperature Tstg −65 to +150 °C
Caution Product quality may suffer if the absolute maximum rating is exceeded even momentarily for any
parameter. That is, the absolute maximum ratings are rated values at which the product is on the verge
of suffering physical damage, and therefore the product must be used under conditions that ensure that
the absolute maximum ratings are not exceeded.
Remark Unless specified otherwise, the characteristics of alternate-function pins are the same as those of the port pins.