Datasheet

RL78/L12
CHAPTER 31 ELECTRICAL SPECIFICATIONS (G: TA = -40 to +105°C)
R01UH0330EJ0200 Rev.2.00 952
Dec 13, 2013
(3) When reference voltage (+) = VDD (ADREFP1 = 0, ADREFP0 = 0), reference voltage (−) = VSS (ADREFM = 0),
target pin : ANI0, ANI1, ANI16 to ANI23, internal reference voltage, and temperature sensor output voltage
(T
A = −40 to +105°C, 2.4 V ≤ EVDD = VDD ≤ 5.5 V, VSS = EVSS = 0 V, Reference voltage (+) = VDD, Reference voltage (−)
= VSS)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Resolution RES 8 10 bit
Overall error
Note 1
AINL 10-bit resolution 2.4 V ≤ VDD ≤ 5.5 V 1.2 ±7.0 LSB
Conversion time tCONV 10-bit resolution 3.6 V ≤ VDD ≤ 5.5 V 2.125 39 μ s
2.7 V ≤ VDD ≤ 5.5 V 3.1875 39 μ s
2.4 V ≤ VDD ≤ 5.5 V 17 39 μ s
10-bit resolution
Target pin: Internal reference
voltage, and temperature
sensor output voltage (HS
(high-speed main) mode)
3.6 V ≤ V
DD ≤ 5.5 V 2.375 39 μ s
2.7 V ≤ VDD ≤ 5.5 V 3.5625 39 μ s
2.4 V ≤ VDD ≤ 5.5 V 17 39 μ s
Zero-scale error
Notes 1, 2
EZS
10-bit resolution
2.4 V ≤ VDD ≤ 5.5 V ±0.60 %FSR
Full-scale error
Notes 1, 2
EFS
10-bit resolution
2.4 V ≤ VDD ≤ 5.5 V ±0.60 %FSR
Integral linearity error
Note 1
ILE 10-bit resolution 2.4 V ≤ VDD ≤ 5.5 V ±4.0 LSB
Differential linearity error
Note 1
DLE 10-bit resolution 2.4 V ≤ V
DD ≤ 5.5 V ±2.0 LSB
Analog input voltage VAIN ANI0, ANI1 0 VDD V
ANI16 to ANI23 0 EVDD V
Internal reference voltage output
(2.4 V ≤ V
DD ≤ 5.5 V, HS (high-speed main) mode)
V
BGR
Note 3
V
Temperature sensor output voltage
(2.4 V ≤ V
DD ≤ 5.5 V, HS (high-speed main) mode)
V
TMPS25
Note 3
V
Notes 1. Excludes quantization error (±1/2 LSB).
2. This value is indicated as a ratio (%FSR) to the full-scale value.
3. Refer to 31.6.2 Temperature sensor/internal reference voltage characteristics.