Datasheet

RL78/L12 CHAPTER 17 INTERRUPT FUNCTIONS
R01UH0330EJ0200 Rev.2.00 712
Dec 13, 2013
Figure 17-4. Format of Priority Specification Flag Registers (PR00L, PR00H, PR01L, PR01H, PR02L, PR10L,
PR10H, PR11L, PR11H, PR12L) (64-pin products) (2/2)
Address: FFFEBH After reset: FFH R/W
Symbol <7> <6> <5> <4> 3 2 1 <0>
PR01H TMPR007 TMPR006 TMPR005 TMPR004 1 1 1 KRPR0
Address: FFFEFH After reset: FFH R/W
Symbol <7> <6> <5> <4> 3 2 1 <0>
PR11H TMPR107 TMPR106 TMPR105 TMPR104 1 1 1 KRPR1
Address: FFFD8H After reset: FFH R/W
Symbol 7 6 5 <4> <3> <2> <1> <0>
PR02L 1 1 1 FLPR0 MDPR0 PPR07 PPR06 0
Address: FFFDCH After reset: FFH R/W
Symbol 7 6 5 <4> <3> <2> <1> <0>
PR12L 1 1 1 FLPR1 MDPR1 PPR17 PPR16 0
XXPR1X XXPR0X Priority level selection
0 0 Specify level 0 (high priority level)
0 1 Specify level 1
1 0 Specify level 2
1 1 Specify level 3 (low priority level)
Caution The above is the bit layout for the 64-pin products. The available bits differ depending
on the product. For details about the bits available for each product, see Table 17-2.
Be sure to set bits that are not available to the initial value.