Datasheet

RL78/L12 CHAPTER 17 INTERRUPT FUNCTIONS
R01UH0330EJ0200 Rev.2.00 701
Dec 13, 2013
Table 17-1. Interrupt Source List (2/3)
Interrupt
Type
Default Priority
Note 1
Interrupt Source
Internal/
External
Vector
Table
Address
Basic Configuration Type
Note 2
64-pin 52-pin 48-pin 44-pin 32-pin
Name Trigger
Maskable 15 INTIICA0 End of IICA0 communication Internal 0026H (A) √ √ √ √ √
16 INTTM01 End of timer channel 01 count or
capture
0028H √ √ √ √ √
17 INTTM02 End of timer channel 02 count or
capture
002AH √ √ √ √ √
18 INTTM03 End of timer channel 03 count or
capture
002CH √ √ √ √ √
19 INTAD End of A/D conversion 002EH √ √ √ √ √
20 INTRTC Fixed-cycle signal of real-time
clock/alarm match detection
0030H √ √ √ √ √
21 INTIT Interval signal detection 0032H √ √ √ √ √
22 INTKR Key return signal detection External 0034H (C) √ √ √ √ √
23 INTTM04 End of timer channel 04 count or
capture
Internal 003CH (A) √ √ √ √ √
24 INTTM05 End of timer channel 05 count or
capture
003EH √ √ √ √ √
25 INTTM06 End of timer channel 06 count or
capture
0040H √ √ √ √ √
26 INTTM07 End of timer channel 07 count or
capture
0042H √ √ √ √ √
27 INTP6 Pin input edge detection External 0046H (B) √ − − − −
28 INTP7 0048H √ − − − −
29 INTMD End of division operation/
Overflow occur
Internal 004AH (A) √ √ √ √ √
30 INTFL End of sequencer interrupt
Note 3
004CH √ √ √ √ √
Notes 1. The default priority determines the sequence of interrupts if two or more maskable interrupts occur
simultaneously. Zero indicates the highest priority and 31 indicates the lowest priority.
2. Basic configuration types (A) to (D) correspond to (A) to (D) in Figure 17-1.
3. Be used only at the self programming library.
Remark √: Mounted
−: Not mounted