Datasheet

RL78/L12 CHAPTER 23 SAFETY FUNCTIONS
R01UH0330EJ0200 Rev.2.00 788
Dec 13, 2013
23.3.6.1 Invalid memory access detection control register (IAWCTL)
This register is used to control the detection of invalid memory access and RAM/SFR guard function.
IAWEN bit is used in invalid memory access detection function.
The IAWCTL register can be set by an 8-bit memory manipulation instruction.
Reset signal generation clears this register to 00H.
Figure 23-12. Format of Invalid Memory Access Detection Control Register (IAWCTL)
Address: F0078H After reset: 00H R/W
Symbol 7 6 5 4 3 2 1 0
IAWCTL IAWEN 0 GRAM1 GRAM0 0 GPORT GINT GCSC
IAWEN
Note
Control of invalid memory access detection
0 Disable the detection of invalid memory access.
1 Enable the detection of invalid memory access.
Note Only writing 1 to the IAWEN bit is enabled, not writing 0 to it after setting it to 1.
Remark By specifying WDTON = 1 for the option byte, the invalid memory access function is always
enabled regardless of the setting for the IAWEN bit. (For details, see CHAPTER 25 OPTION
BYTE.)