Datasheet

RL78/L12 CHAPTER 5 CLOCK GENERATOR
R01UH0330EJ0200 Rev.2.00 141
Dec 13, 2013
5.3.5 Oscillation stabilization time select register (OSTS)
This register is used to select the X1 clock oscillation stabilization wait time.
When the X1 clock is made to oscillate by clearing the MSTOP bit to start the X1 oscillation circuit operating, actual
operation is automatically delayed for the time set in the OSTS register.
When switching the CPU clock from the high-speed on-chip oscillator clock or subsystem clock to the X1 clock, and
when using the high-speed on-chip oscillator clock for switching the X1 clock from the oscillating state to STOP mode, use
the oscillation stabilization time counter status register (OSTC) to confirm that the desired oscillation stabilization time has
elapsed after release from the STOP mode. That is, use the OSTC register to check that the oscillation stabilization time
corresponding to its setting has been reached.
The OSTS register can be set by an 8-bit memory manipulation instruction.
Reset signal generation sets the OSTS register to 07H.
<R>