Datasheet

RL78/G14 3. ELECTRICAL SPECIFICATIONS (G: TA = -40 to +105 C)
R01DS0053EJ0200 Rev. 2.00 Page 130 of 187
Oct 25, 2013
Note 5. Current flowing only to the watchdog timer (including the operating current of the low-speed on-chip oscillator).
The supply current of the RL78 microcontrollers is the sum of I
DD1, IDD2 or IDD3 and IWDT when the watchdog timer is in
operation.
Note 6. Current flowing only to the A/D converter. The supply current of the RL78 microcontrollers is the sum of IDD1 or IDD2 and
I
ADC when the A/D converter operates in an operation mode or the HALT mode.
Note 7. Current flowing only to the LVD circuit. The supply current of the RL78 microcontrollers is the sum of IDD1, IDD2 or IDD3 and
I
LVD when the LVD circuit is in operation.
Note 8. Current flowing during programming of the data flash.
Note 9. Current flowing during self-programming.
Note 10. For shift time to the SNOOZE mode, see 23.3.3 SNOOZE mode in the RL78/G14 User’s Manual Hardware.
Note 11. Current flowing only to the D/A converter. The supply current of the RL78 microcontrollers is the sum of IDD1 or IDD2 and
I
DAC when the D/A converter operates in an operation mode or the HALT mode.
Note 12. Current flowing only to the comparator circuit. The supply current of the RL78 microcontrollers is the sum of IDD1, IDD2, or
I
DD3 and ICMP when the comparator circuit is in operation.
Note 13. A comparator and D/A converter are provided in products with 96 KB or more code flash memory.
Remark 1. fIL: Low-speed on-chip oscillator clock frequency
Remark 2. fSUB: Subsystem clock frequency (XT1 clock oscillation frequency)
Remark 3. fCLK: CPU/peripheral hardware clock frequency
Remark 4. Temperature condition of the TYP. value is TA = 25 C