Datasheet
RL78/G14 3. ELECTRICAL SPECIFICATIONS (G: TA = -40 to +105 C)
R01DS0053EJ0200 Rev. 2.00 Page 116 of 187
Oct 25, 2013
3.3 DC Characteristics
3.3.1 Pin characteristics
Note 1. Value of current at which the device operation is guaranteed even if the current flows from the EVDD0, EVDD1, VDD pins to
an output pin.
Note 2. However, do not exceed the total current value.
Note 3. Specification under conditions where the duty factor 70%.
The output current value that has changed to the duty factor
70% the duty ratio can be calculated with the following
expression (when changing the duty factor from 70% to n%).
• Total output current of pins = (I
OH × 0.7)/(n × 0.01)
<Example> Where n = 80% and I
OH = -10.0 mA
Total output current of pins = (-10.0 × 0.7)/(80 × 0.01)
-8.7 mA
However, the current that is allowed to flow into one pin does not vary depending on the duty factor.
A current higher than the absolute maximum rating must not flow into one pin.
Caution P00, P02 to P04, P10, P11, P13 to P15, P17, P30, P43 to P45, P50 to P55, P71, P74, P80 to P82, and P142 to P144
do not output high level in N-ch open-drain mode.
Remark
Unless specified otherwise, the characteristics of alternate-function pins are the same as those of the port pins.
(TA = -40 to +105 C, 2.4 V EVDD0 = EVDD1 VDD 5.5 V, VSS = EVSS0 = EVSS1 = 0 V)
Items Symbol Conditions MIN. TYP. MAX. Unit
Output current, high
Note 1
IOH1 Per pin for P00 to P06,
P10 to P17, P30, P31,
P40 to P47, P50 to P57,
P64 to P67, P70 to P77,
P80 to P87, P100 to P102, P110,
P111, P120, P130, P140 to P147
2.4 V
EVDD0 5.5 V -3.0
Note 2
mA
Total of P00 to P04, P40 to P47,
P102, P120, P130, P140 to P145
(When duty
70%
Note 3
)
4.0 V
EVDD0 5.5 V -30.0 mA
2.7 V
EVDD0 < 4.0 V -10.0 mA
2.4 V
EVDD0 < 2.7 V -5.0 mA
Total of P05, P06, P10 to P17,
P30, P31, P50 to P57,
P64 to P67, P70 to P77,
P80 to P87, P100, P101, P110,
P111, P146, P147
(When duty
70%
Note 3
)
4.0 V
EVDD0 5.5 V -30.0 mA
2.7 V
EVDD0 < 4.0 V -19.0 mA
2.4 V
EVDD0 < 2.7 V -10.0 mA
Total of all pins
(When duty
70%
Note 3
)
2.4 V
EVDD0 5.5 V -60.0 mA
I
OH2 Per pin for P20 to P27,
P150 to P156
2.4 V VDD 5.5 V -0.1
Note 2
mA
Total of all pins
(When duty
70%
Note 3
)
2.4 V
VDD 5.5 V -1.5 mA
(1/5)