Datasheet

RL78/G14 2. ELECTRICAL SPECIFICATIONS (A, D: TA = -40 to +85 C)
R01DS0053EJ0200 Rev. 2.00 Page 105 of 187
Oct 25, 2013
Note 1. Excludes quantization error (±1/2 LSB).
Note 2. This value is indicated as a ratio (% FSR) to the full-scale value.
Note 3. Refer to 2.6.2 Temperature sensor characteristics/internal reference voltage characteristic .
Note 4. When reference voltage (-) = VSS, the MAX. values are as follows.
Zero-scale error: Add ±0.35%FSR to the MAX. value when reference voltage (-) = AV
REFM.
Integral linearity error: Add ±0.5 LSB to the MAX. value when reference voltage (-) = AV
REFM.
Differential linearity error: Add ±0.2 LSB to the MAX. value when reference voltage (-) = AV
REFM.
(4) When reference voltage (+) = Internal reference voltage (ADREFP1 = 1, ADREFP0 = 0), reference voltage (-)
= AVREFM/ANI1 (ADREFM = 1), target pin: ANI0, ANI2 to ANI14, ANI16 to ANI20
(T
A = -40 to +85 °C, 2.4 V  VDD  5.5 V, 1.6 V  EVDD = EVDD1  VDD, VSS = EVSS0 = EVSS1 = 0 V, Reference voltage
(+) = V
BGR
Note 3
, Reference voltage (-) = AVREFM = 0 V
Note 4
, HS (high-speed main) mode)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Resolution RES 8 bit
Conversion time t
CONV 8-bit resolution 2.4 V  VDD  5.5 V 17 39 s
Zero-scale error
Notes 1, 2
EZS
8-bit resolution 2.4 V  VDD  5.5 V
0.60 % FSR
Integral linearity error
Note 1
ILE
8-bit resolution 2.4 V
 VDD  5.5 V
2.0 LSB
Differential linearity error
Note 1
DLE
8-bit resolution 2.4 V
 VDD  5.5 V
1.0 LSB
Analog input voltage
V
AIN 0
V
BGR
Note 3
V