Datasheet
RL78/G14 3. ELECTRICAL SPECIFICATIONS (G: TA = -40 to +105 C)
R01DS0053EJ0200 Rev. 2.00 Page 139 of 187
Oct 25, 2013
Note 1. When DAPmn = 0 and CKPmn = 0, or DAPmn = 1 and CKPmn = 1. The SIp setup time becomes “to SCKp↓” when
DAPmn = 0 and CKPmn = 1, or DAPmn = 1 and CKPmn = 0.
Note 2. When DAPmn = 0 and CKPmn = 0, or DAPmn = 1 and CKPmn = 1. The SIp hold time becomes “from SCKp↓” when
DAPmn = 0 and CKPmn = 1, or DAPmn = 1 and CKPmn = 0.
Note 3. When DAPmn = 0 and CKPmn = 0, or DAPmn = 1 and CKPmn = 1. The delay time to SOp output becomes “from
SCKp↑” when DAPmn = 0 and CKPmn = 1, or DAPmn = 1 and CKPmn = 0.
Note 4. C is the load capacitance of the SOp output lines.
Note 5. The maximum transfer rate when using the SNOOZE mode is 1 Mbps.
Caution Select the normal input buffer for the SIp pin and SCKp pin and the normal output mode for the SOp pin by using
port input mode register g (PIMg) and port output mode register g (POMg).
Remark 1.
p: CSI number (p = 00, 01, 10, 11, 20, 21, 30, 31), m: Unit number (m = 0, 1),
n: Channel number (n = 0 to 3), g: PIM number (g = 0, 1, 3 to 5, 14)
Remark 2. fMCK: Serial array unit operation clock frequency
(Operation clock to be set by the CKSmn bit of serial mode register mn (SMRmn). m: Unit number,
n: Channel number (mn = 00 to 03, 10 to 13))
(3) During communication at same potential (CSI mode) (slave mode, SCKp... external clock input)
(T
A = -40 to +105 C, 2.4 V EVDD0 = EVDD1 VDD 5.5 V, VSS = EVSS0 = EVSS1 = 0 V)
Parameter Symbol Conditions HS (high-speed main) mode Unit
MIN. MAX.
SCKp cycle time
Note 5
tKCY2
4.0 V EVDD0 5.5 V
20 MHz
fMCK 16/fMCK ns
f
MCK 20 MHz
12/f
MCK ns
2.7 V
EVDD0 5.5 V
16 MHz
fMCK 16/fMCK ns
f
MCK 16 MHz
12/f
MCK ns
2.4 V
EVDD0 5.5 V
12/f
MCK and 1000 ns
SCKp high-/low-level width t
KH2, tKL2
4.0 V EVDD0 5.5 V
t
KCY2/2 - 14 ns
2.7 V
EVDD0 5.5 V
t
KCY2/2 - 16 ns
2.4 V
EVDD0 5.5 V
t
KCY2/2 - 36 ns
SIp setup time (to SCKp↑)
Note 1
tSIK2
2.7 V EVDD0 5.5 V
1/f
MCK + 40 ns
2.4 V
EVDD0 5.5 V
1/f
MCK + 60 ns
SIp hold time (from SCKp↑)
Note 2
tKSI2 1/fMCK + 62 ns
Delay time from SCKp↓ to SOp output
Note 3
tKSO2
C = 30 pF
Note 4
2.7 V EVDD0 5.5 V
2/f
MCK + 66 ns
2.4 V
EVDD0 5.5 V
2/f
MCK + 113 ns
(1/2)