Datasheet

RL78/G13 2. ELECTRICAL SPECIFICATIONS (A, D: T
A = -40 to +85°C)
Page 59 of 194R01DS0131EJ0310 Rev.3.10
Nov 15, 2013
(TA = −40 to +85°C, 1.6 V ≤ EVDD0 = EVDD1 ≤ VDD ≤ 5.5 V, VSS = EVSS0 = EVSS1 = 0 V) (2/5)
Items Symbol Conditions MIN. TYP. MAX. Unit
Output current,
low
Note 1
I
OL1
Per pin for P00 to P07, P10 to P17,
P30 to P37, P40 to P47, P50 to P57,
P64 to P67, P70 to P77, P80 to P87,
P90 to P97, P100 to P106,
P110 to P117, P120, P125 to P127,
P130, P140 to P147
20.0
Note 2
mA
Per pin for P60 to P63
15.0
Note 2
mA
Total of P00 to P04, P07, P32 to
P37,
P40 to P47, P102 to P106, P120,
P125 to P127, P130, P140 to P145
(When duty ≤ 70%
Note 3
)
4.0 V ≤ EV
DD0 ≤ 5.5 V 70.0 mA
2.7 V ≤ EVDD0 < 4.0 V 15.0 mA
1.8 V ≤ EVDD0 < 2.7 V 9.0 mA
1.6 V ≤ EVDD0 < 1.8 V 4.5 mA
Total of P05, P06, P10 to P17, P30,
P31, P50 to P57, P60 to P67,
P70 to P77, P80 to P87, P90 to P97,
P100, P101, P110 to P117, P146,
P147
(When duty ≤ 70%
Note 3
)
4.0 V ≤ EV
DD0 ≤ 5.5 V 80.0 mA
2.7 V ≤ EVDD0 < 4.0 V 35.0 mA
1.8 V ≤ EVDD0 < 2.7 V 20.0 mA
1.6 V ≤ EVDD0 < 1.8 V 10.0 mA
Total of all pins
(When duty ≤ 70%
Note 3
)
150.0 mA
IOL2 Per pin for P20 to P27, P150 to P156
0.4
Note 2
mA
Total of all pins
(When duty ≤ 70%
Note 3
)
1.6 V ≤ V
DD ≤ 5.5 V 5.0 mA
Notes 1. Value of current at which the device operation is guaranteed even if the current flows from an output
pin to the EV
SS0, EVSS1 and VSS pin.
2. However, do not exceed the total current value.
3. Specification under conditions where the duty factor ≤ 70%.
The output current value that has changed to the duty factor > 70% the duty ratio can be calculated
with the following expression (when changing the duty factor from 70% to n%).
• Total output current of pins = (I
OL × 0.7)/(n × 0.01)
<Example> Where n = 80% and IOL = 10.0 mA
Total output current of pins = (10.0 × 0.7)/(80 × 0.01) ≅ 8.7 mA
However, the current that is allowed to flow into one pin does not vary depending on the duty factor.
A current higher than the absolute maximum rating must not flow into one pin.
Remark Unless specified otherwise, the characteristics of alternate-function pins are the same as those of the
port pins.