Datasheet

RL78/G13 3. ELECTRICAL SPECIFICATIONS (G: T
A = -40 to +105°C)
Page 172 of 194R01DS0131EJ0310 Rev.3.10
Nov 15, 2013
3.6.2 Temperature sensor/internal reference voltage characteristics
(TA = −40 to +105°C, 2.4 V ≤ VDD ≤ 5.5 V, VSS = 0 V, HS (high-speed main) mode)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Temperature sensor output voltage VTMPS25 Setting ADS register = 80H, TA = +25°C 1.05 V
Internal reference voltage VBGR Setting ADS register = 81H 1.38 1.45 1.5 V
Temperature coefficient FVTMPS Temperature sensor that depends on the
temperature
−3.6 mV/°C
Operation stabilization wait time tAMP 5 μ s
3.6.3 POR circuit characteristics
(T
A = −40 to +105°C, VSS = 0 V)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Detection voltage VPOR Power supply rise time 1.45 1.51 1.57 V
VPDR Power supply fall time 1.44 1.50 1.56 V
Minimum pulse width TPW 300 μ s
Note Minimum time required for a POR reset when VDD exceeds below VPDR. This is also the minimum time
required for a POR reset from when V
DD exceeds below 0.7 V to when VDD exceeds VPOR while STOP mode is
entered or the main system clock is stopped through setting bit 0 (HIOSTOP) and bit 7 (MSTOP) in the clock
operation status control register (CSC).
T PW
V POR
V PDR or 0.7 V
Supply voltage (V
DD )