Datasheet

RL78/G13 3. ELECTRICAL SPECIFICATIONS (G: T
A = -40 to +105°C)
Page 170 of 194R01DS0131EJ0310 Rev.3.10
Nov 15, 2013
(3) When reference voltage (+) = VDD (ADREFP1 = 0, ADREFP0 = 0), reference voltage (−) = VSS (ADREFM =
0), target pin : ANI0 to ANI14, ANI16 to ANI26, internal reference voltage, and temperature sensor output
voltage
(T
A = −40 to +105°C, 2.4 V ≤ EVDD0 = EVDD1 ≤ VDD ≤ 5.5 V, VSS = EVSS0 = EVSS1 = 0 V, Reference voltage (+) =
VDD, Reference voltage (−) = VSS)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Resolution RES 8 10 bit
Overall error
Note 1
AINL 10-bit resolution 2.4 V ≤ V
DD ≤ 5.5 V 1.2 ±7.0 LSB
Conversion time tCONV 10-bit resolution
Target pin: ANI0 to ANI14,
ANI16 to ANI26
3.6 V ≤ VDD ≤ 5.5 V 2.125 39 μ s
2.7 V ≤ VDD ≤ 5.5 V 3.1875 39 μ s
2.4 V ≤ VDD ≤ 5.5 V 17 39 μ s
10-bit resolution
Target pin: Internal reference
voltage, and temperature
sensor output voltage (HS
(high-speed main) mode)
3.6 V ≤ VDD ≤ 5.5 V 2.375 39 μ s
2.7 V ≤ VDD ≤ 5.5 V 3.5625 39 μ s
2.4 V ≤ VDD ≤ 5.5 V 17 39 μ s
Zero-scale error
Notes 1, 2
E
ZS
10-bit resolution
2.4 V ≤ VDD ≤ 5.5 V ±0.60 %FSR
Full-scale error
Notes 1, 2
E
FS
10-bit resolution
2.4 V ≤ VDD ≤ 5.5 V ±0.60 %FSR
Integral linearity error
Note
1
ILE 10-bit resolution 2.4 V ≤ V
DD ≤ 5.5 V ±4.0 LSB
Differential linearity error
Note 1
DLE 10-bit resolution 2.4 V ≤ V
DD ≤ 5.5 V ±2.0 LSB
Analog input voltage VAIN ANI0 to ANI14 0 VDD V
ANI16 to ANI26 0 EVDD0 V
Internal reference voltage output
(2.4 V ≤ V
DD ≤ 5.5 V, HS (high-speed main) mode)
V
BGR
Note 3
V
Temperature sensor output voltage
(2.4 V ≤ V
DD ≤ 5.5 V, HS (high-speed main) mode)
V
TMPS25
Note 3
V
Notes 1. Excludes quantization error (±1/2 LSB).
2. This value is indicated as a ratio (%FSR) to the full-scale value.
3. Refer to 3.6.2 Temperature sensor/internal reference voltage characteristics.