Datasheet

RL78/G13 3. ELECTRICAL SPECIFICATIONS (G: T
A = -40 to +105°C)
Page 140 of 194R01DS0131EJ0310 Rev.3.10
Nov 15, 2013
(3) Peripheral Functions (Common to all products)
(TA = −40 to +105°C, 2.4 V ≤ EVDD0 = EVDD1 ≤ VDD ≤ 5.5 V, VSS = EVSS0 = EVSS1 = 0 V)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Low-speed on-
chip oscillator
operating
current
I
FIL
Note 1
0.20
μ A
RTC operating
current
IRTC
Notes 1, 2, 3
0.02
μ A
12-bit interval
timer operating
current
I
IT
Notes 1, 2,
4
0.02
μ A
Watchdog timer
operating
current
IWDT
Notes 1, 2, 5
f
IL = 15 kHz 0.22 μ A
A/D converter
operating
current
I
ADC
Notes
1, 6
When conversion
at maximum
speed
Normal mode, AV
REFP = VDD = 5.0 V 1.3 1.7 mA
Low voltage mode, AVREFP = VDD = 3.0 V 0.5 0.7 mA
A/D converter
reference
voltage current
I
ADREF
Note
1
75.0
μ A
Temperature
sensor
operating
current
I
TMPS
Note 1
75.0
μ A
LVD operating
current
I
LVD
Notes 1,
7
0.08
μ A
Self
programming
operating
current
I
FSP
Notes 1,
9
2.50 12.20
mA
BGO operating
current
I
BGO
Notes
1, 8
2.50 12.20
mA
SNOOZE
operating
current
I
SNOZ
Note 1
ADC operation
The mode is performed
Note 10
0.50 1.10
mA
The A/D conversion operations are
performed, Loe voltage mode, AV
REFP =
V
DD = 3.0 V
1.20 2.04
mA
CSI/UART operation 0.70 1.54
mA
Notes 1. Current flowing to the VDD.
2. When high speed on-chip oscillator and high-speed system clock are stopped.
3. Current flowing only to the real-time clock (RTC) (excluding the operating current of the low-speed on-
chip ocsillator and the XT1 oscillator). The supply current of the RL78 microcontrollers is the sum of the
values of either I
DD1 or IDD2, and IRTC, when the real-time clock operates in operation mode or HALT mode.
When the low-speed on-chip oscillator is selected, IFIL should be added. IDD2 subsystem clock operation
includes the operational current of the real-time clock.
4. Current flowing only to the 12-bit interval timer (excluding the operating current of the low-speed on-chip
ocsillator and the XT1 oscillator). The supply current of the RL78 microcontrollers is the sum of the
values of either I
DD1 or IDD2, and IIT, when the 12-bit interval timer operates in operation mode or HALT
mode. When the low-speed on-chip oscillator is selected, I
FIL should be added.
5. Current flowing only to the watchdog timer (including the operating current of the low-speed on-chip
oscillator). The supply current of the RL78 is the sum of IDD1, IDD2 or IDD3 and IWDT when the watchdog
timer operates.