Datasheet

R01UH0309EJ0500 Rev. 5.00 Page 1395 of 1408
Sep 24, 2012
Item Page Revision (See Manual for Details)
17.7 Usage Notes 1056,
1057
Added
5. Restriction on Setting Transfer Rate in Use of Multi-Master
6. Restriction on Use of Bit Manipulation Instructions to Set MST
and TRS in Use of Multi-Master
7. Note on Master Receive Mode
8. Notes on Changing from Master Transmit Mode to Master
Receive Mode
18.3.4 A/D Control
Register (ADCR_0)
Unit 0
1072,
1073
Added
Bit Bit Name Description
7
6
0
TRGS1
TRGS0
EXTRGS
010: Enables A/D conversion start by external
trigger from TPU (units 0 and 1)*
Note:* If this bit is set the same as the TRGS_1, TRGS0, and EXTRGS bits
in ADCR_1, the A/D converter units 0 and 1 start A/D conversion by
conversion start trigger from TPU (units 0 and 1).
18.3.5 A/D Control
Register (ADCR_1)
Unit 1
1074,
1075
Added
Bit Bit Name Description
7
6
0
TRGS1
TRGS0
EXTRGS
Enables A/D conversion start by external trigger
from TPU (units 0 and 1)*
1
5
4
SCANE
SCANS
11: Scan mode. A/D conversion is performed
continuously for channels 1 to 8.*
2
Notes: 1. If this bit is set the same as the TRGS_1, TRGS0, and EXTRGS
bits in ADCR_0, the A/D converter units 0 and 1 start A/D
conversion by conversion start trigger from TPU (units 0 and 1).
2. Setting prohibited in the H8S/2424 Group.
18.7.10 otes on Start of
A/D Conversion by
Conversion Start
Trigger from TPU
(Units 0 and 1)
1093 Added