Datasheet

Page 1390 of 1408 R01UH0309EJ0500 Rev. 5.00
Sep 24, 2012
Item Page Revision (See Manual for Details)
• P63/IRQ11-A/
TEND1/TMCI1-A
585 Notes amended
3. When using as TMCI1-A input, set TMRS in PFCR3 to 0
before other register setting.
• P62/IRQ10-A/
TEND0/TMCI0-A
586 Notes amended
3. When using as TMCI0-A input, set TMRS in PFCR3 to 0
before other register setting.
• P61/IRQ9-
A/DREQ1/
TMRI1-A
586 Notes amended
3. When using as TMRI1-A input, set TMRS in PFCR3 to 0
before other register setting.
4. When using as DREQ1 input, set USBDRQE in PFCR3 to 0
before other register setting.
• P60/IRQ8-
A/DREQ0/
TMRI0-A
587 Notes amended
3. When using as TMRI0-A input, set TMRS in PFCR3 to 0
before other register setting.
4. When using as DREQ0 input, set USBDRQE in PFCR3 to 0
before other register setting. When USBDRQE is 1, use of the
DREQ0 signal from the DREQ0 input pin is not allowed.
10.7.5 Pin Functions
(1) Pin Functions of
H8S/2456 Group and
H8S/2456R Group
• P85/EDACK3/
IRQ5-B/SCK3/
PO5-B/TIOCB4-B/
TMO1-B
• Modes 3 and 7
(EXPE = 0)
591 Notes amended
3. When using as PO5-B output, set PPGS in PFCR3 to 1 before
other register setting.
4. When using as TIOCB4-B input/output, set TPUS in PFCR3 to
1 before other register setting.
5. When using as TMO1-B output, set TMRS in PFCR3 to 1
before other register setting.
• P83/ETEND3/
IRQ3-B/RxD3/
PO3-B/TIOCD3-B/
TMCI1-B
• Modes 3 and 7
(EXPE = 0)
594 Notes amended
4. When using as PO3-B output, set PPGS in PFCR3 to 1 before
other register setting.
5. When using as TIOCD3-B input/output, set TPUS in PFCR3 to
1 before other register setting.
6. When using as TMCI1-B input, set TMRS in PFCR3 to 1
before other register setting.