Datasheet

R01UH0309EJ0500 Rev. 5.00 Page 1389 of 1408
Sep 24, 2012
Item Page Revision (See Manual for Details)
• P20/PO0-A/
TIOCA3-A/
TMRI0-A/PUPD+
562 Notes amended
4. When using as PO0-A output, set PPGS in PFCR3 to 0 before
other register setting.
5. When using as TIOCA3-A input/output, set TPUS in PFCR3 to
0 before other register setting.
6. When using as TMRI0-A input, set TMRS in PFCR3 to 0
before other register setting.
10.3.5 Pin Functions
• P34/SCK0/SCK4-A/
SDA0
567 Notes amended
3. When using as SCK4-A input/output, set SCK4S in PFCR4 to
0 before other register setting.
10.5.5 Pin Functions
• P52/SCK2/IRQ2-A/
BACK-B/PO4-B/
TIOCA4-B/TMO0-B
• Modes 3 and 7
(EXPE = 0)
576 Notes amended
4. When using as PO4-B output, set PPGS in PFCR3 to 1 before
other register setting.
5. When using as TIOCA4-B input/output, set TPUS in PFCR3 to
1 before other register setting.
6. When using as TMO0-B output, set TMRS in PFCR3 to 1
before other register setting.
• P51/RxD2/IRQ1-A/
SCL3/BREQ-B/
PO2-B/TIOCC3-B/
TMCI0-B
• Modes 3 and 7
(EXPE = 0)
579 Notes amended
6. When using as PO2-B output, set PPGS in PFCR3 to 1 before
other register setting.
7. When using as TIOCC3-B input/output, set TPUS in PFCR3 to
1 before other register setting.
8. When using as TMCI0-B input, set TMRS in PFCR3 to 1
before other register setting.
• P50/TxD2/IRQ0-A/
SDA3/BREQO-B/
PO0-B/TIOCA3-B/
TMRI0-B
• Modes 3 and 7
(EXPE = 0)
581 Notes amended
6. When using as PO0-B output, set PPGS in PFCR3 to 1 before
other register setting.
7. When using as TIOCA3-B input/output, set TPUS in PFCR3 to
1 before other register setting.
8. When using as TMRI0-B input, set TMRS in PFCR3 to 1
before other register setting.
10.6.5 Pin Functions
• P65/IRQ13-A/
DACK1/TMO1-A
584 Notes amended
2. When using as TMO1-A output, set TMRS in PFCR3 to 0
before other register setting.
• P64/IRQ12-A/
DACK0/TMO0-A
585 Notes amended
2. When using as TMO0-A output, set TMRS in PFCR3 to 0
before other register setting.