Datasheet

Page 1388 of 1408 R01UH0309EJ0500 Rev. 5.00
Sep 24, 2012
Item Page Revision (See Manual for Details)
• P15/DACK1/PO13/
TIOCB1/TCLKC/
SSI0-A
541 Notes amended
3. When using as SSI0-A input, set SSI0S1 and SSI0S0 in
PFCR5 to B'00 before other register setting.
4. When using as SSI0-A output, set SSI0S1 and SSI0S0 in
PFCR5 to B'00 before other register setting.
• P14/DACK0/PO12/
TIOCA1/SSO0-A
543 Notes amended
2. When using as SSO0-A input, set SSO0S1 and SSO0S0 in
PFCR5 to B'00 before other register setting.
3. When using as SSO0-A output, set SSO0S1 and SSO0S0 in
PFCR5 to B'00 before other register setting.
• P10/DREQ0/PO8/
TIOCA0
548 Notes amended
3. When using as DREQ0 input, set USBDRQE in PFCR3 to 0
before other register setting. When USBDRQE is 1, use of the
DREQ0 signal from the DREQ0 input pin is not allowed.
10.2.5 Pin Functions
(1) Pin Functions of
H8S/2456 Group and
H8S/2456R Group
• P25/PO5-A/
TIOCB4-A/
IRQ13-B/WAIT-B/
VBUS
• Modes 3 and 7
(EXPE = 0)
555 Notes amended
3. When using as PO5-A output, set PPGS in PFCR3 to 0 before
other register setting.
4. When using as TIOCB4-A input/output, set TPUS in PFCR3 to
0 before other register setting.
• P20/PO0-A/
TIOCA3-A/IRQ8-B/
PUPD+
557 Notes amended
4. When using as PO0-A output, set PPGS in PFCR3 to 0 before
other register setting.
5. When using as TIOCA3-A input/output, set TPUS in PFCR3 to
0 before other register setting.
(2) Pin Functions of
H8S/2454 Group
• P25/WAIT-B/
PO5-A/TIOCB4-A/
TMO1-A/VBUS
• Modes 3 and 7
(EXPE = 0)
560 Notes amended
2. When using as PO5-A output, set PPGS in PFCR3 to 0 before
other register setting.
3. When using as TIOCB4-A input/output, set TPUS in PFCR3 to
0 before other register setting.
4. When using as TMO1-A output, set TMRS in PFCR3 to 0
before other register setting.