Datasheet

Section 23 Power-Down Modes
R01UH0310EJ0500 Rev. 5.00 Page 1143 of 1384
Sep 25, 2012
H8S/2426, H8S/2426R, H8S/2424 Group
Notes: Stopped (Retained) in the table means that internal register values are retained and
internal operations are suspended.
Stopped (Reset) in the table means that internal register values and internal states are
initialized.
In module stop function, only modules for which a stop setting has been made are
stopped (reset or retained).
1. IRQ8 to IRQ15 are not supported by the H8S/2424 group.
2. The active or stopped state can be selected by means of the MSTP0 bit in MSTPCR.
3. Not supported by the H8S/2424 group.
4. TDR, SSR, and RDR are stopped (reset) and other registers are stopped (retained).
5. BC2 to BC0 are stopped (reset) and other registers are stopped (retained).
6. The active or stopped state can be selected by means of the bits in RMMSTPCR.