Datasheet

Section 21 Flash Memory
R01UH0310EJ0500 Rev. 5.00 Page 1129 of 1384
Sep 25, 2012
H8S/2426, H8S/2426R, H8S/2424 Group
• ERROR (1 byte): Error status
ERROR = 0 indicates normal operation.
ERROR = 1 indicates error has occurred.
Table 21.11 Error Code
Code Description
H'00 No error
H'11 Sum check error
H'12 Program size error
H'21 Device code mismatch error
H'22 Clock mode mismatch error
H'24 Bit-rate selection disable error
H'25 Input frequency error
H'26 Multiplication ratio error
H'27 Operating frequency error
H'29 Block number error
H'2A Address error
H'2B Data size error
H'51 Erasure error
H'52 Erasure incomplete error
H'53 Programming error
H'54 Selection processing error
H'80 Command error
H'FF Bit-rate-adjustment confirmation error
• SUM (1 byte): Sum check