Datasheet

R01UH0310EJ0500 Rev. 5.00 Page 1367 of 1384
Sep 25, 2012
Item Page Revision (See Manual for Details)
• P22/IRQ10-B/
PO2-A/
TIOCC3-A
556 Notes amended
4. When using as PO2-A output, set PPGS in PFCR3 to 0 before
other register setting.
5. When using as TIOCC3-A input/output, set TPUS in PFCR3 to
0 before other register setting.
• P21/IRQ9-B/
PO1-A/
TIOCB3-A
557 Notes amended
3. When using as PO1-A output, set PPGS in PFCR3 to 0 before
other register setting.
4. When using as TIOCB3-A input/output, set TPUS in PFCR3 to
0 before other register setting.
• P20/PO0-A/
TIOCA3-A/
IRQ8-B
558 Notes amended
4. When using as PO0-A output, set PPGS in PFCR3 to 0 before
other register setting.
5. When using as TIOCA3-A input/output, set TPUS in PFCR3 to
0 before other register setting.
(2) Pin Functions of
H8S/2424 Group
• P25/WAIT-B/
PO5-A/
TIOCB4-A/
TMO1-A
• Modes 3 and 7
(EXPE = 0)
561 Notes amended
2. When using as PO5-A output, set PPGS in PFCR3 to 0 before
other register setting.
3. When using as TIOCB4-A input/output, set TPUS in PFCR3 to
0 before other register setting.
4. When using as TMO1-A output, set TMRS in PFCR3 to 0
before other register setting.
• P24/PO4-A/
TIOCA4-A/
TMO0-A/
RxD4-A
563 Notes amended
3. When using as PO4-A output, set PPGS in PFCR3 to 0 before
other register setting.
4. When using as TIOCA4-A input/output, set TPUS in PFCR3 to
0 before other register setting.
5. When using as TMO0-A output, set TMRS in PFCR3 to 0
before other register setting.
6. When using as RxD4-A input, set RXD4S in PFCR4 to 0 before
other register setting.