Datasheet

Page 1364 of 1384 R01UH0310EJ0500 Rev. 5.00
Sep 25, 2012
Item Page Revision (See Manual for Details)
Table 7.4 DMAC
Transfer Modes
348,
349
Amended
Transfer Source
• TPU channel 0 to 5 compare match/input capture A interrupt
• SCI transmit data empty interrupt
• SCI receive data full interrupt
• A/D converter conversion end interrupt
• External request
• TPU channel 0 to 5 compare match/input capture A interrupt
• SCI transmit data empty interrupt
• SCI receive data full interrupt
• A/D converter conversion end interrupt
• External request
7.5.2 Sequential
Mode
351 Amended
Transfer requests (activation sources) consist of A/D converter
conversion end interrupts, external requests, SCI transmit data
empty and receive data full interrupts and TPU channel 0 to 5
compare match/inp,ut capture A interrupts. External requests can
only be specified for channel B.
7.5.3 Idle Mode 354 Amended
Transfer requests (activation sources) consist of A/D converter
conversion end interrupts, external requests, SCI transmit data
empty and receive data full interrupts and TPU channel 0 to 5
compare match/input capture A interrupts. External requests can
only be specified for channel B.
7.5.4 Repeat Mode 358 Amended
Transfer requests (activation sources) consist of A/D converter
conversion end interrupts, external requests, SCI transmit data
empty and receive data full interrupts, and TPU channel 0 to 5
compare match/input capture A interrupts. External requests can
only be specified for channel B.
7.5.7 Block Transfer
Mode
372 Amended
Transfer requests (activation sources) consist of A/D converter
conversion end interrupts, external requests, SCI transmit data
empty and receive data full interrupts, EP1FIFO full interrupt and
EP2FIFO empty interrupt of the USB, and TPU channel 0 to 5
compare match/input capture A interrupts.