Datasheet

Section 2 CPU
R01UH0310EJ0500 Rev. 5.00 Page 71 of 1384
Sep 25, 2012
H8S/2426, H8S/2426R, H8S/2424 Group
Table 2.9 System Control Instructions
Instruction Size* Function
TRAPA ⎯ Starts trap-instruction exception handling.
RTE ⎯ Returns from an exception-handling routine.
SLEEP ⎯ Causes a transition to a power-down state.
LDC B/W (EAs) → CCR, (EAs) → EXR
Moves the contents of a general register or memory, or immediate data
to CCR or EXR. Although CCR and EXR are 8-bit registers, word-size
transfers are performed between them and memory. The upper 8 bits
are valid.
STC B/W CCR → (EAd), EXR → (EAd)
Transfers CCR or EXR contents to a general register or memory.
Although CCR and EXR are 8-bit registers, word-size transfers are
performed between them and memory. The upper 8 bits are valid.
ANDC B CCR ∧ #IMM → CCR, EXR ∧ #IMM → EXR
Logically ANDs the CCR or EXR contents with immediate data.
ORC B CCR ∨ #IMM → CCR, EXR ∨ #IMM → EXR
Logically ORs the CCR or EXR contents with immediate data.
XORC B CCR ⊕ #IMM → CCR, EXR ⊕ #IMM → EXR
Logically exclusive-ORs the CCR or EXR contents with immediate data.
NOP ⎯ PC + 2 → PC
Only increments the program counter.
Note: * Size refers to the operand size.
B: Byte
W: Word