Datasheet

R01UH0310EJ0500 Rev. 5.00 Page 1369 of 1384
Sep 25, 2012
Item Page Revision (See Manual for Details)
10.5.5 Pin Functions
• P52/SCK2/
IRQ2-A/
BACK-B/
PO4-B/
TIOCA4-B/
TMO0-B
• Modes 3 and 7
(EXPE = 0)
581 Notes amended
4. When using as PO4-B output, set PPGS in PFCR3 to 1 before
other register setting.
5. When using as TIOCA4-B input/output, set TPUS in PFCR3 to
1 before other register setting.
6. When using as TMO0-B output, set TMRS in PFCR3 to 1
before other register setting.
• P51/RxD2/
IRQ1-A/SCL3/
BREQ-B/PO2-B/
TIOCC3-B/
TMCI0-B
• Modes 3 and 7
(EXPE = 0)
583 Notes amended
6. When using as PO2-B output, set PPGS in PFCR3 to 1 before
other register setting.
7. When using as TIOCC3-B input/output, set TPUS in PFCR3 to
1 before other register setting.
8. When using as TMCI0-B input, set TMRS in PFCR3 to 1 before
other register setting.
• P50/TxD2/
IRQ0-A/SDA3/
BREQO-B/
PO0-B/
TIOCA3-B/
TMRI0-B
• Modes 3 and 7
(EXPE = 0)
585 Notes amended
6. When using as PO0-B output, set PPGS in PFCR3 to 1 before
other register setting.
7. When using as TIOCA3-B input/output, set TPUS in PFCR3 to
1 before other register setting.
8. When using as TMRI0-B input, set TMRS in PFCR3 to 1 before
other register setting.
10.6.5 Pin Functions
• P65/IRQ13-A/
DACK1/TMO1-A
588 Notes amended
2. When using as TMO1-A output, set TMRS in PFCR3 to 0
before other register setting.
• P64/IRQ12-A/
DACK0/TMO0-A
589 Notes amended
2. When using as TMO0-A output, set TMRS in PFCR3 to 0
before other register setting.
• P63/IRQ11-A/
TEND1/TMCI1-A
589 Notes amended
3. When using as TMCI1-A input, set TMRS in PFCR3 to 0 before
other register setting.
• P62/IRQ10-A/
TEND0/TMCI0-A
590 Notes amended
3. When using as TMCI0-A input, set TMRS in PFCR3 to 0 before
other register setting.