Datasheet

Section 2 CPU
Rev. 3.00 Sep. 28, 2009 Page 43 of 710
REJ09B0384-0300
Table 2.12 Absolute Address Access Ranges
Absolute Address Normal Mode* Advanced Mode
Data address 8 bits (@aa:8) H'FF00 to H'FFFF H'FFFF00 to H'FFFFFF
16 bits (@aa:16) H'0000 to H'FFFF H'000000 to H'007FFF,
H'FF8000 to H'FFFFFF
32 bits (@aa:32) H'000000 to H'FFFFFF
Program instruction
address
24 bits (@aa:24)
Note: Normal mode is not available in this LSI.
2.7.6 Immediate⎯#xx:8, #xx:16, or #xx:32
The instruction contains 8-bit (#xx:8), 16-bit (#xx:16), or 32-bit (#xx:32) immediate data as an
operand.
The ADDS, SUBS, INC, and DEC instructions contain immediate data implicitly. Some bit
manipulation instructions contain 3-bit immediate data in the instruction code, specifying a bit
number. The TRAPA instruction contains 2-bit immediate data in its instruction code, specifying a
vector address.
2.7.7 Program-Counter Relative⎯@(d:8, PC) or @(d:16, PC)
This mode is used in the Bcc and BSR instructions. An 8-bit or 16-bit displacement contained in
the instruction is sign-extended and added to the 24-bit PC contents to generate a branch address.
Only the lower 24 bits of this branch address are valid; the upper 8 bits are all assumed to be 0
(H′00). The PC value to which the displacement is added is the address of the first byte of the next
instruction, so the possible branching range is –126 to +128 bytes (–63 to +64 words) or –32766 to
+32768 bytes (–16383 to +16384 words) from the branch instruction. The resulting value should
be an even number.