Datasheet

Section 16 LPC Interface (LPC)
Rev. 3.00 Sep. 28, 2009 Page 411 of 710
REJ09B0384-0300
R/W
Bit Bit Name
Initial
Value
Slave Host Description
4 ⎯ 0 R/W ⎯
Reserved
The initial value should not be changed.
3 SDWNE 0 R/W ⎯ LPC Software Shutdown Enable
Controls LPC interface shutdown. For details of the
LPC shutdown function, and the scope of initialization
by an LPC reset and an LPC shutdown, see section
16.4.5, LPC Interface Shutdown Function.
0: Normal state, LPC software shutdown setting
enabled
[Clearing conditions]
• Writing 0
• LPC hardware reset or LPC software reset
[Setting condition]
Writing 1 after reading SDWNE = 0
2 to 0 ⎯ All 0 R/W ⎯ Reserved
The initial value should not be changed.