Datasheet

Section 11 8-Bit Timer (TMR)
Rev. 3.00 Sep. 28, 2009 Page 228 of 710
REJ09B0384-0300
11.5 Interrupt Sources
TMR_0, TMR_1, TMR_Y and TMR_X can generate three types of interrupts: CMIA, CMIB, and
OVI.
Table 11.3 shows the interrupt sources and priorities. Each interrupt source can be enabled or
disabled independently by interrupt enable bits in TCR or TCSR. Independent signals are sent to
the interrupt controller for each interrupt.
The CMIA and CMIB interrupts can be used as DTC activation interrupt sources.
Table 11.3 Interrupt Sources of 8-Bit Timers TMR_0, TMR_1, TMR_Y, and TMR_X
Channel Name Interrupt Source
Interrupt
Flag
DTC
Activation
Interrupt
Priority
TMR_X CMIAX TCORA_X compare-match CMFA Possible High
CMIBX TCORB_X compare-match CMFB Possible
OVIX TCNT_X overflow OVF Not possible
TMR_0 CMIA0 TCORA_0 compare-match CMFA Possible
CMIB0 TCORB_0 compare-match CMFB Possible
OVI0 TCNT_0 overflow OVF Not possible
TMR_1 CMIA1 TCORA_1 compare-match CMFA Possible
CMIB1 TCORB_1 compare-match CMFB Possible
OVI1 TCNT_1 overflow OVF Not possible
TMR_Y CMIAY TCORA_Y compare-match CMFA Possible
CMIBY TCORB_Y compare-match CMFB Possible
OVIY TCNT_Y overflow OVF Not possible Low