Datasheet

Section 5 Interrupt Controller
Rev. 3.00 Sep. 28, 2009 Page 89 of 710
REJ09B0384-0300
Operation Order: If the same interrupt is selected as a DTC activation source and a CPU
interrupt source, the DTC data transfer is performed first, followed by CPU interrupt exception
handling.
Table 5.9 summarizes interrupt source selection and interrupt source clearing control according to
the settings of the DTCE bit of DTCERA to DTCERE in the DTC and the DISEL bit of MRB in
the DTC.
Table 5.9 Interrupt Source Selection and Clearing Control
Settings
DTC Interrupt Source Selection/Clearing Control
DTCE DISEL DTC CPU
0 * × Δ
1 0 Δ ×
1 Δ
[Legend]
Δ: The relevant interrupt is used. Interrupt source clearing is performed.
(The CPU should clear the source flag in the interrupt handling routine.)
: The relevant interrupt is used. The interrupt source is not cleared.
×: The relevant interrupt cannot be used.
*: Don't care