Datasheet

REJ09B0465-0300 Rev. 3.00 Page 965 of 982
Sep 17, 2010
Item Page Revision (See Manual for Details)
Section 14 Timer RB
14.2 Register Descriptions
14.2.1 Timer RB Control
Register (TRBCR)
421 Amended
Bit Symbol Description
1 TCSTF :
[Setting conditions]
• When 1 is written to TSTART
and counting is started.
• The start of counting after
ELOPA of the event link
controller is selected counting
by timer RB, the specified event
is occurred, and the TSTART bit
is set to 1.
:
14.2.5 Timer RB Interrupt
Request Status Register
(TRBIR)
426 Section title amended
14.3 Operation
14.3.3 Programmable One-
Shot Generation Mode
Figure 14.3 Operation in
Programmable One-Shot
Generation Mode
433 Amended
Conditions for the above operation:
TRBPRE = H'01, TRBPR=H'01
TOPL = 0 and TOCNT = 0 in TRBIOC
INOSTG = 1 (TRGB pin one-shot trigger function is enabled)
INOSEG = 1 (Rising edge trigger)
14.5 Usage Notes 440 Amended and added
11. When values for TRBPRE and TRBPR are
successively read out from the same register, allow at
least two cycles of the clock source for counting as the
minimum interval for reading
12. When timer RB selects the timer RA underflow as a
count source, be sure to set timer RA to timer mode,
pulse output mode, or event counter mode.