Datasheet

Section 17 Timer RE
Page 620 of 982 REJ09B0465-0300 Rev. 3.00
Sep 17, 2010
H8S/20103, H8S/20203, H8S/20223, H8S/20115, H8S/20215, H8S/20235 Group
Timer RE operation is stopped.
TCSTF in TRECR1=0?
TSTART in TRECR1=0
TRERST in TRECR1=1
TRERST in TRECR1=0
Set TRECSR, TRESEC,
TREMIN, TREHR,
TREWK, TRECR1,
H12_H24, PM, and INT.
Set TRECR2.
Timer RE registers and control
circuit are reset.
Clock output and clock source are
selected and second, minute, hour,
day-of-week, operating mode,
a.m/p.m, and interrupt source are set.
An interrupt source is selected.
TSTART in TRECR1=1
TCSTF in TRECR1=1?
Timer RE operation is started.
Figure 17.3 Initial Setting Procedure