Datasheet

Section 7 ROM
REJ09B0465-0300 Rev. 3.00 Page 223 of 982
Sep 17, 2010
H8S/20103, H8S/20203, H8S/20223, H8S/20115, H8S/20215, H8S/20235 Group
Table 7.12 Bit Values in FLMSTR and Corresponding Errors
Bit Values in FLMSTR
FMEBSF FMPRSF Error Error Generation Conditions
0 0 Successful end
0 1 Programming error The programming command is
executed and results in
unsuccessful programming.
Lock-bit programming error The lock-bit program command
is executed and results in
unsuccessful programming.
1 0 Erasure error The erasure command is
executed and results in
unsuccessful erasure.
Blank checking error The blank checking command
is executed and it is detected
that the specified block is not
blank.
1 1 Command sequence error
• A command is not written
correctly.
• A data value other than
H'D0 and H'FF is written in
the last cycle of the
command that consists of
two command cycles.
• The erasure command is
input in erase-suspend
mode.
• The programming command
is input for the suspended
block in erase-suspend
mode.