Datasheet

Section 28 Electrical Characteristics
Page 934 of 982 REJ09B0465-0300 Rev. 3.00
Sep 17, 2010
H8S/20103, H8S/20203, H8S/20223, H8S/20115, H8S/20215, H8S
/
20235 Group
Notes: 1. Set AVcc = Vcc when the A/D converter is not used.
2. Al
STOP1
is the current in active and sleep modes while the A/D converter is idle.
3. Al
STOP2
is the current at reset and in standby, subactive, and subsleep modes while the
A/D converter is idle.
28.6 D/A Converter Characteristics
Table 28.9 D/A Converter Characteristics
V
CC
= 2.7 to 5.5 V, V
SS
= AV
SS
= 0.0 V, VCC ≥ AVCC, Ta = −20 to +85 °C (N version)/
−40 to +85 °C (D version), unless otherwise indicated.
Values
Item Symbol
Applicable
Pins
Test Conditions Min. Typ. Max. Unit Notes
Analog power supply
voltage
AVcc AVcc 2.7 Vcc 5.5 V
Resolution 8 8 8 bit
Conversion time DA0 to DA1 Load capacitance
= 20 pF
⎯ ⎯ 10.0 μs
Absolute accuracy DA0 to DA1 Load resistance =
2 MΩ
⎯ ±2.0 ±3.0 LSB