Datasheet

Section 24 A/D Converter
REJ09B0465-0300 Rev. 3.00 Page 829 of 982
Sep 17, 2010
H8S/20103, H8S/20203, H8S/20223, H8S/20115, H8S/20215, H8S/20235 Group
Bit Symbol Bit Name Description R/W
5 CMPFC1 CMPI interrupt
condition 1
0: Does not generate an interrupt by a comparison
result change.
1:
In single compare mode:
Sets the CMPF bit to 1 if the comparison result of
the selected channel changes from 0 to 1.
In scan compare mode:
Sets the CMPF bit to 1 if the comparison result of
any of the selected channels changes from 0 to 1.
R/W
4 CMPFC0 CMPI interrupt
condition 0
0: Does not generate an interrupt by a comparison
result change.
1:
In single compare mode:
Sets the CMPF bit to 1 if the comparison result of
the selected channel changes from 0 to 1.
In scan compare mode:
Sets the CMPF bit to 1 if the comparison result of
any of the selected channels changes from 0 to 1.
R/W
3 to 0 ⎯ Reserved These bits are read as 0. The write value should be 0. ⎯